kennybuntinx
-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by kennybuntinx
-
-
5.8.1 - sorry - that was a typo .
-
I came from 5.1.8 . It proposed to upgrade on the printer itself - no download myself .
Just out of warranty .... printer of 5K... pfft
-
-
Dear Product Developpers ...
Stop putting energy in cloud stuff if you don't have the basics right. Please add a simple thing that would make a lot of users happy with a S5 Material station....
Make the light be dimable or just turn on when opening the door and turn off when you close the door ....Serious for a 3K device , this should be your first prio on the list to fix
Kenny
-
Come on guys - How hard could it be to implement a UI for this - unless you are using the same driverboard for the leds from the S5.
This was also my first thought when I bought it a few days ago . At least you should be able to adjust the light to the setting in your s5 ...
This is ridiculous for a 3K device
Kenny
- 1
-
Thx for the tips. I finally figured it out and guess what - I am an IT person , imagine that someone tries to do this with no programming background .
I personally think after spending 7.5K on a printer , this should have been much simpler and come with the UI of Cura.
/Kenny
-
I bought it today and I am quite disappointed with the selection of materials . All is well when you use Ultimaker material with nfc chip .. I think it is crap that you cannot select and upload your own profiles .
Now I tried the above procedure but my profiles don't show up
Any tips or advise . I change the guid and everything ... can't seem to end up on my material station..
Kenny
Introducing: Ultimaker firmware 6.1.1 (with Static IP!)
in Firmware
Posted
yeah - it simply sucks ... Every firmware there are so much issues with it