Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Everything posted by DivideByZero

  1. Amazing, thank you so much for testing this out. Also for explaining the deep blue line bit so I can check myself. Thanks again!!
  2. I know it lets you set it higher... but did it actually do over 100, that's the question? Thanks for the warning about wearing out your filament, but I was aware already. Just need to test some things. Cheers
  3. Hi, Looking at upping my "maximum retraction count" to help test my stringing issues. Default was 90, max is 99 before Cura gets angry and goes orange. What happens when I exceed this? Does it ignore numbers over 100, or does it do it anyway and just warn me in Orange that I am doing something crazy? Is Maximum Value Warning, warning you that you have gone past the maximum value - or does it just warn once you exceed it? "retraction_count_max": { "label": "Maximum Retraction Count",
  4. Downloaded a profile from Facebook last night. Imported that and it doesn't have the issue... A previously downloaded profile I had from a week or so ago does have the issue. Do the devs look in this forum? Someone must know what this is about. Notihng in the manual, but it must be coming from somewhere.
  5. I'm on 3.6 too and I already reinstalled. Will try on a different pc I guess.
  6. Well, damn. What is wrong with my Cura? Just did it again, with Extra fine 0.06 and changed it to 0.1 and created a new profile. Global = 0.1 Extruder1 = 0.06. Seeing how I have some weird stuff going on, I would very much like to get to the bottom of this.
  7. Hi, I have used the change at Z option to create temperature towers, which is a really handy feature. Is there a way to add other options to the change on Z selection? What I was looking to build is a retraction tower (as I am lazy and this would be super handy when you change filaments. The two options I would like to use would be "Retraction Distance" and "Retraction Speed". It would be so nice to do one print for retraction distance, going from 0mm to 7mm in one print. Then a second to change from 5mm/s up to like 70 or something.
  8. Nope - not the startup gcode. Removed my start code, restarted Cura, even tried a few profiles - the settings still didn't line up. Took the "Normal" profile, which is 0.15 LH. Changed LH to 0.2 and created a new profile from the current settings. Global = 0.2 (correct) Extruder 1 = 0.15 (wrong) So, where is this extruder 1 setting coming from? The profile I created, while based on the Normal template, had been changed before creation. Does this happen to you too?
  9. I actually Had a thought about this while I was trying to sleep last night. I do have a custom start-up script which does a wipe. That's the only place I can think it's coming from. I'm out and about at the moment, but will check and confirm when I get home.
  10. Attached you can see the Global Vs Extruder settings. I have also shown the actual profile setting and also what I can see under the Extruder setting... I must be missing something somewhere as I don't see Extruder layer Height of 0.15 set anywhere. Thanks
  11. Hi, I'm still not clear on where Global Settings come from and why they are different (or where you set them). The reason I am curious about this in relationship to my stringing is I have tried all the usual stuff (and more) so I am wondering what is going on in the slicer now. This global settings is really what I want to understand for this question - I am not looking for stringing help in itself. But, here is what I have tried for stringing (probably not in order): 1) Temp tower to get the ideal temp for my PLA. 2) Retraction tests 3
  12. Hi, When looking at a saved profile, it shows 2 tabs. Global Settings and Extruder 1 (as I have a single extruder CR10S). But the settings for the profile are different. For example: Global Settings Layer Height = 0.2 Extruder 1 Layer Height = 0.15 So, how come there are two different settings stored in the one profile and yet I can only find one place to set these. I have been having some major issues with stringing (to the point of destroying prints) so I am wondering if the settings are different to what I think I
  13. Yep, sorted. Cura crashed out on me the other day and I think some stuff ended up a bit odd. New profile is not doing it. Thanks
  14. Yeah, when I updated the FW I saved it. Something had changed the max_x_jerk etc. from 12 to 20 (just double checked). Reboot and it was back to normal. Thanks - good info. Definitely happening in Cura. I even have M204 + M205 setup in my startup code for the correct values... but then after that, I get this: ;LAYER_COUNT:50 ;LAYER:0 M107 M204 S5000 M205 X30 Y30 G0 F3600 X130.766 Y130.38 Z0.2 M204 S500 M205 X20 Y20 ;TYPE:SKIRT Above we can see X20 Y20 - which is what it ends up. Just to double check... I don't have
  15. Hi, In Cura 3.6 I switched off Jerk control via the tick box. I would have assumed that this should then let the printer use its defaults. Though something strange happened, after printing, I did an M503 and it returned a jerk of 20. I double checked my FW and it was set to 8 when I flashed it. I rebooted my printer and a M503 then reported the 8 I was expecting. Any suggestions what I should do to test what is causing this please? Any ideeas what I can look for in the GCODE to check if something is changing it? Ultimately, what I wan
  16. Hehe, yeah thanks. That's actually kinda why I asked the question. A while back I got fed up with adding settings here and there so clicked the show all option. What I was worried was by doing that, I activated a lot of things I didn't need. Guess that was not the case, I must have changed something somewhere that had a knock on effect. For me, I backed up c:\users\myuser\appdata\roaming\cura and then uninstalled Cura. It asked me if I want to delete all my settings too, which I said yes to. Since reinstall and all the settings being back to day one, things
  17. Well, trying the reinstall - first question is if you want to remove all your settings... which I do, I really do. I am unable to print without strings. I have been working on the settings and nothing is helping, so I am hoping something was changed in Cura at some point which is messing me up. Retraction, esteps, jerk, travel, speed, temp, coasting... tried it all (and probably more), still stringing. Please be something I did in Cura…!
  18. Ah, so even if a setting is not visible, it could still be doing something in the background - you just can't see the values. Is there a way to reset all the values to their defaults? Or is it a case of uninstall / re-install?
  19. Hi, Had a look in the manual, but still not clear on this... If a setting is not visible, is it not in use? Or does it just run at the Cura default? For 2 examples. 1) If travel speed is not visible in Cura, will it use the default travel speed in my printers firmware? 2) If Jerk control is Enabled, but the settings are not visible - would that be using my printer firmware defaults, or just unseen Cura settings? Thanks in advance.
  20. Hi, I have a CR-10S with Marlin 1.18 on it now, which I have set up using Tacblades FW found on Thingiverse. My question is, do I need to change the way the printer is added to Cura? I have it down as the standard CR-10S with Marlin as the G-Code flavour. I checked the manual and it doesn't specify. I assume that's right? Thanks in advance.
  21. Yeah, Octopint gcode viewer issue as it printed normally at the start, just waiting for L3 to make sure it doesn't double wipe (though I don't think it will as it's only in the gcode once).
  22. OK, well, I don't think this is a CURA issue as looking at the gcode, the first thing that happens is my startup code. I guess this must be Octoprint doing something strange. Thanks again. 🙂
  23. I'd sooner not, I get a lot better start of print with it. It does a purge and a wipe so the PLA is good to go when it starts the actual print. Might be that I have to manually edit the gcode once it is created then, which I have not done before, but how hard can it be... LOL.
  24. Hum, this seems to have done something strange. I use a specific machine startup code, it does a wipe and activates mesh bed levelling etc. With these support options on, the wipe is now happening at layer 3, having done layer 1 and 2 of the print already. It's odd, I can see the travel for the hot end starts in L1 from where it ends in L3 (after the wipe). Any idea what would cause that? This is new since the support options, so I am guessing they are somehow jumping the queue?!
  25. Thanks both. For this model I will probably use the support solution as I don't want to lose any of the bottom layer as if it did that it would really notice on this model. However, that's a handy tip for most models. I am working on the assumption that if the bottom is cut off on the Z axis, it just doesn't print, rather than it all bunches up?
  • Create New...