[Ultimaker 2 Plus feeder grommet worn out]

did you find one?

I also need one

 

[Ultimaker 2+ Maintenance]

The printer has been running very well now for 20 hours or so.

Is there a maintenance guide or something that should be checked?

Its generally running really well, apart from some occasional rattle from the print bed, doesn't appear to affect the print quality though.

 

[BOATS]

Moving onto larger models now, hopefully to test on the water

Thinking of using TPLA, what paint and primer is recommended for this for outdoor use?

 

[BOATS]

I use Rhino3D for most of my 3D modelling 

[BOATS]

thanks

 

[BOATS]

Tried a small scale model boat as my second print with the default settings UM 2. Came out really nicely i think.

[Tip: Bed adhesion]

thanks all, I watched the video and followed the advice, used the glue stick and less clearance on the calibration, printed out with no problems:)

[Tip: Bed adhesion]

Not sure about the brim, this was the ultimaker robot that came with the printer.

Looks like the first layer needs some more work, will try to wash the plate and recalibrate again

 

[Tip: Bed adhesion]

Just done my first test print on a 2+ extended.

Happy with detail and resolution but the model came loose by its self mid print.

I used some glue to help it stick.

What should should i change for the next test?

 

[BOATS]

Hi,

Just started up my extended 2+ to print model boats and related equipment.

Any others working within the same field?

Petter