Jump to content

KamalDahiya

Dormant
  • Posts

    3
  • Joined

  • Last visited

Everything posted by KamalDahiya

  1. Thank you so much Smithy for your consideration 😄 A little clarity on... 1. Can I Bake my Nylon spool on my ultimaker3 heat bed. (like Ultimaker website suggested for PVA). If yes, then what temperature and time for nylon? 2. Yes, I agree the Polybox would be better. But it will take few days to ship to my country and till then i have imp prints to give, So made this hack myself. But my question is the polybox claims to maintain humidity % below 10% and claims hygroscopic materials requires humdity% below 15 %. I am pretty sure my hack box is not keeping humidity% below 15%. it somewhere between 40-45%. and on ultimaker website it says Hygroscopic materials can print upto 50 % humidity, So what should be the humidity% maintained for prinitng Nylon an Pva ?
  2. Hello Everyone:) My NYLON and PVA are showing signs of moisture absorption (crackling sound when printing and bubbles) My current room humidity measures 45- 50% One thing still not clear is what is the Humidity % required to print PVA and Nylon (hygroscopic materials) without absorbing humidity ? On ultimaker website it seems to be written upto 50% is okay. but polymaker seems to say less than 15% humidity is required to print. I store both my materials in airtight box with lots of silica. I have attached photos of the same. http://www.3dtechsupplies.com.au/News/polybox-in-action-how-does-polymakers-dry-printing-and-storage-solution-perform https://ultimaker.com/en/resources/52602-material-handling-and-storage What is the best option to print with my current humidity % (45-50%): ? Option1: Bake Nylon and PVA on the ultimaker 3 heatbed at 55 deg for few hours before hand when printing. and later keep it in the airtight box with silica. Option2: Make a carboard box with a lots of silica in it and put it on the ultimaker spools and stick it leaving 2 holes for material to feed into the feeder. ( I have made this for time being for some urgent prints. Option3: cover the whole printer with a huge box so that minimum air goes inside and put lot of silica inside. Option 4: Buy Poly box (drybox) for Nylon and PVA, But it will disable NFC feature and create other extrusion problems because of travel from poly box to feeder.( i read in posts) Please suggest best solution to this problem.
×
×
  • Create New...