I upgraded to 4.0 from 2.7 and now my prints start to far from the build plate. I go back to 2.7 and everything prints fine. Below is my first few lines of gcode: can someone tell me what I need to change to correct the issue. Thanks
Works
;FLAVOR:Marlin
;TIME:560
;Filament used: 0.414691m
;Layer height: 0.15
;Generated with Cura_SteamEngine 2.7.0
M190 S60
M104 S205
M109 S205
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
;LAYER_COUNT:99
;LAYER:0
M107
M205 X30 Y30
G0 F3600 X140.248 Y103.213 Z0.3
M205 X20 Y20
;TYPE:SKIRT
G1 F1800 X140.916 Y102.339 E0.05488
G1 X141.342 Y101.859 E0.0869
G1 X142.069 Y101.151 E0.13753
G1 X142.547 Y100.748 E0.16872
G1 X143.514 Y100.043 E0.22842
Doesn't work
;FLAVOR:Marlin
;TIME:515
;Filament used: 0.135118m
;Layer height: 0.15
;Generated with Cura_SteamEngine 4.0.0
M140 S60
M105
M190 S60
M104 S205
M105
M109 S205
M82 ;absolute extrusion mode
G28 ;Home
G1 Z15.0 F6000 ;Move the platform down 15mm
;Prime the extruder
G92 E0
G1 F200 E3
G92 E0
G92 E0
G1 F1500 E-6.5
;LAYER_COUNT:100
;LAYER:0
M107
M205 X30 Y30
G0 F3600 X140.52 Y102.838 Z0.3
M205 X20 Y20
;TYPE:SKIRT
G1 F1500 E0
G1 F1800 X141.497 Y101.702 E0.02818
G1 X141.946 Y101.251 E0.04016