SlyCat

After trying to diagnose my under-extrusion issues I decided to see if the problem could be software side I opened the calibration cube stl, saved the gcode file Then changed the diameter of the filament (in material profile manager & machine profile manager, as my filament is actually 1.73mm) and saved as a second gcode When I compared the two gcode file they are identical to each other Even the amount extruded, in terms of length, does not change with either of these two filament diameter parameters being changed Used the Ender3 & CR-10 printer profiles with the stock Normal and Fine setting profiles, yield the same results Reinstalled 3.6 and the problem persists Only option to mitigate this was to install the PrinterSettings plugin and set the diameter from there, but it is not ideal as it does not follow what the material profile diameter is (i'd have to reset this number any time I change material profiles) Hoping some users could shed some light or further confirm this bug