Hi Labern,
Thanks for replaying. The printer I'm using is a Creality CR-10 mini. The material used is PLA+. Nozzle size is 0.4mm, speed set to 40mm/s, temp to 230C (Seems to print better at that temp. smoother result), layer height was set to 0.08mm. A closer look at the layers is attached and every setting in Cura also. Like I said, I'm still very new to 3d printing. So, there's probably a lot of setting set wrong lol.
Also, I've noticed that as I scale the models size in Cura, the position of the missing z layers seems to move, but I'll have to double check that by printing a couple models.
Hope this helps!