Jump to content

Tettaura

Dormant
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Tettaura

  1. Hi @yellowshark! Thank you for your answer! I'm printing with a PLA certified for food contact following the temperatures indicated in its technical data sheet. I will try anyway to lower them a little ... About the layer height, this is my Cura settings: Initial layer height 0,3 Layer height 0,2 Today I do some tests following your suggestions. I'll let you know as soon as possible! 😀
  2. Hi! Line width: 0.4 Wall line Count: 1 (this is what do you mean for "Number of walls"?) Infill overlap % 0.04 Wall Thickness 0,4 Extruder temp 230 print speed 30 The preview doesn't show defects apparently...
  3. In particular, as you can see in this second image, I noticed that vertical lines appear only in the parts where there's the filling. Any idea?🙄 Thanks!
  4. Hi! As you can see in the attached image, my 3d printed objects show unsightly vertical lines on outer walls. Someone can help me to make the print better? I use Cura 4.0.0 with my Anycubic Kossel Linear Plus. Thanks!😀
  5. Hi Thank you! It seems to work😄
  6. Hi! I recently tried to print an stl with thin particulars and the print leaves some little holes, as shown on figure. I checked the stl but it seems to be perfect, without strange holes! How can I fix them? Actually I use cura 3.6.0 Thank you
×
×
  • Create New...