Hello, I'm trying to print ABS with my cr-10s and keep getting split problem.
I'm using Cura 3.6.0, nozzle temperature at 250C, bed temp at 100C with layer height 0.1mm
Extrusion speed is 20mm/s with 2 shells, 10% infill.
Regardless of the print size, splitting happened.
I think printing speed isn't that fast and the temperature is high enough.
I didn't check the fan power but I didn't change default setting value of it.
Please see attached images.
https://photos.app.goo.gl/zz3fVsNpFcyMzBDd6
Any help would be appreciated!