Jump to content
Ultimaker Community of 3D Printing Experts

YM3

Member
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by YM3

  1. Thank you for your assistance! Yes it was printed on two different Ultimaker S5s (with both the same setup and firmware version) Same material, same batch, but different spool. We will check the fans. Could it also be that room temperature has an effect? (as these printers are located in different rooms, in different countries) But it could also be that the material has an inconsistency. We used rPLA natural transparent from Filamentive. I guess with recycled filaments there is a bigger chance that inconsistencies occur. Although, th
  2. Hi! Hope somebody might be able to point us in the right direction. We have 2 Ultimaker printers, both S5. We have them on the same firmware update (4.8.1) with the same setup for extruders. Now we printed a gcode file, for which we used extruder 1 with AA0.4 nozzle and a PLA filament. Both printers exactly the same setup and gcode file, but still the outcome is different > see images attached. One model is really rough on the edges, the other one (from the other printer) has smooth edges. We hope somebody might be able to help us figure out
  3. camera issue resolved with reinstalling UM app 🙂 Personally, I do think Ultimaker Team is doing a great job. All confidence that firmware 5.2.8 is going to be superb after the first bug fixes are done. The world isn't perfect, but we can only learn from this and improve 🙂
  4. Same problems here with my UM3. No camera and x/y calibration without filament being extruded. Waiting for the hotfix....but don't know if the camera issue will be addressed as well.
  5. https://www.thingiverse.com/thing:1451156 Here the link to the dual extruder calibration test model download 🙂
  6. I now see that more people are having the same issue, due to the latest firmware update... Hopefully this will be fixed soon!
  7. Same thing here! I have been struggling for 24hrs and was thinking that I was doing something wrong myself.... In the end I just loaded an xy calibration test model, which prints fine with prime blobs at the start, and so could finally do a proper calibration with my new print cores!
  8. Hi, I have installed new printcores on my UM3, but during xy callibration there is no filament extruded from the nozzles. I find this strange, as filament is ok during material load and nozzles are clearly not blocked or anything. I have checked the temperature sensor as well, all fine. I did make a new setup with the Polybox edition II and removed the original spool holder with NFC cable. But the filament is feeded all ok through the feeders and tension looks just fine, just the regular marks no grinding or anything. What could be the problem? I have not started to test with any prints y
×
×
  • Create New...