Hi,
I'm trying to print object with thin walls (1.2mm - it is 3 layers with 0.4 nozzle). With default settings, Cura slice it to 4 travel moves. First three are regular print while last is just return to the start position over existing inner wall (I tried to describe it with first image).
As I read, the problem is in odd wall number and the suggestion was to try setting "Minimum Wall Flow" value to be great than 0 ("Compensate Wall Overlaps" should be checked too). Actually that did the trick and Cura removed unnecessary last move. The last problem I have are tiny blobs on in
