sn2006gy

Tanks all! Post processing script works beautifully!

I see the gcode has values in comments - would be nice to just find where to pass these as parameters [FR] Replacement patterns for print area · Issue #10884 · Ultimaker/Cura (github.com) ;FLAVOR:RepRap ;TIME:1813 ;Filament used: 2.3164m ;Layer height: 0.28 ;MINX:124.335 ;MINY:124.335 ;MINZ:0.24 ;MAXX:175.665 ;MAXY:175.664 ;MAXZ:21.45

I'd like to set my Mesh measuring to be slightly larger than print area (including skirt) and I can't seem to find if cura passes and max x / y into what i can consume in start g code area to be able to parameterize my mesh to only mesh the printed area. Would like to do something like M557 X{first_layer_print_min[0]}:{first_layer_print_max[0]} Y{first_layer_print_min[1]}:{first_layer_print_max[1]} S8

In 3.x I could add a few parts and click "Auto arrange" and they would fit on my build plate. In cura 4 when i import multiple parts, 1 part is on the vitual build plate but the other parts are off screen and i have to zoom out to see them. clicking "arrange all models" fails with a warning it couldn't arrange them yet if i drag them in and put them on the virtual build plate they fit ok. Is this a known issue or something i can tweak? small build plate (marker select mini v2) but worked in prior versions.