Jump to content
Ultimaker Community of 3D Printing Experts


  • Posts

  • Joined

  • Last visited

  • Days Won


burtoogle last won the day on August 20 2020

burtoogle had the most liked content!

Personal Information

  • Industry

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

burtoogle's Achievements



  1. Can you please provide the project file? Do File->Save and attach the .3mf file to this thread. Thanks.
  2. The hiding of the shared heater setting is a knee-jerk reaction based on an incomplete evaluation of the feature's usability. Typical Cura regression, badly conceived and completely untested in the sense that no users were polled to see if they were actually using the feature successfully.
  3. Hello @Rabbit-o. Yes, that feature has been disabled by a UM person (see https://github.com/Ultimaker/Cura/issues/8148 for some further info on this). Personally, I believe that to be a mistake and continue to offer the shared heater setting in my own Cura builds.
  4. The problem is that the model is not manifold (aka watertight). You need to fix the model for Cura to be able to have a reasonable chance of slicing it satisfactorily.
  5. Not wall flow, minimum wall flow!
  6. If users of 3rd party printers aren't willing to try the beta releases, they should expect trouble when the releases arrive as UM do not have the resources to test on anything but their own products. Yes, Cura is supplied FOC but maybe people need to be willing to pay a price for it, the price is that they play an active role in the testing of new releases.
  7. Set min wall flow to a non-zero value, try 50.
  8. Could you please provide an example gcode file that exhibits this problem? Thanks.
  9. Thanks for the file, for me it slices as expected with layer height 0.15. There is a setting called slicing tolerance that could influence the results you get so it may be worth playing with that. I always have that set to "middle".
  10. I'm guessing that there's a problem with the model, can you please share the STL?
  11. I make a 32 bit Cura release for the Raspberry Pi. When the 64 bit OS on the Pi matures I expect I will make a 64 bit release for that and it could be that would run on your ARM chromebook.
  12. Same problem as https://github.com/Ultimaker/Cura/issues/8216 ?
  13. Does, combing stop stringing? Not sure about that, if anything, it could make it worse. Stringing can occur for various reasons and is influenced by filament temperature, printing speed, retraction distance and speed.
  14. One purpose of the blurb is to clarify what the setting label is hinting at. By necessity, the labels are often terse to the point of incomprehension so it's not at all a bad thing to provide a slightly longer version of the label in the blurb.
  • Create New...