Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello everyone, I am running into issues with under extrusion on my outer walls. This can be easily fixed if the inner walls are printed before the outer walls however the setting does not exist. The only thing that comes close to it is "Outer Before Inner Walls". I have tried deselecting that option but in both cases the outer walls are always printed before the inner walls. If you are part of the Cura Team, I would love to see the option in a new update 🙂 PS...I already tried extra prime amount however my piece create inconsistent blobs some are perfect and some are too large depending
  2. @Mari, Hi thanks for the response 🙂 I am trying to print a planter for a tree, and instead of printing the base and planter legs separately I am trying to print them in one piece. I live in the Midwest and the freeze and thaw cycles destroys the crazy glue used to bond the legs and base together. I have a dual extruder and im using two different filaments. In order to keep the support from bonding to the base of the planter I divide the two using a support roof. The support roof is a different material to the planter and support. While this keeps the support from bonding to the
  3. Here is my: Start gcode G28 ;home all M117 Purge extruder G92 E0 G1 Z1.0 F3000 G1 X0.1 Y20 Z0.3 F5000.0 G1 X0.1 Y200.0 Z0.3 F1500.0 E15 G1 X0.4 Y200.0 Z0.3 F5000.0 G1 X0.4 Y20 Z0.3 F1500.0 E30 G92 E0 G1 Z1.0 F3000 M117 All systems go! End gcode G91 G1 F1800 E-3 G1 F3000 Z10 G90 G1 X0 Y220 F1000 M106 S0 M104 S0 M140 S0 M84 It might help someone find whats wrong 😕
  4. @Torgeir sorry it did not work. Layer 5 is still super slow 😞
  5. Great thank you! I will try it out and give updates. Have a good day 🙂
  6. Hello I tried increasing the speed 1000% (so it could go from 6 mm/s to 60 mm/s) at layer 5 (the immediate layer after 4) and it still was printing super slowly.
  7. Ok thank you I will try that out, will give updates. Have a great day 🙂
  8. Hello guys I am trying to change the speed at a specific layer on cura. I use the "ChangeAtZ" post processing option to change the print speed to 50 % of the original one. I specifically input the "single layer" option for behavior. Unfortunately the rest of the job prints at the slowed down speed and does not revert to the original speed. Example: My original print speed is 60 mm/s At layer 4 I change it to 10% of the original speed (6 mm/s). Layer 5 still prints at 6 mm/s (it should be 60 mm/s). I am using a Creality CR-X. Does anyone know how to
  9. Hi everyone, I just got a Creality CR-X 3D printer. My print keeps running into an issue with blobs. Everytime the nozzle changes from one extruder to the next one it primes the nozzle and makes a blob that is dragged onto the prime tower. Sometimes the side of the prime tower catches it and sometimes the blob catches on the actual print and screws it up. I think I am looking for a setting called "prime tower purge volume" however I cannot find it on the newest Cura version. Does anyone know how to stop these blobs? Thanks in advance.
  10. Hello everyone I just wanted to share my discovery. I have been having an issue where some .gcode files sliced on Cura were not showing up on the SD menu of my Creality 3D CR-X. I went and updated the firmware and I was still having the issue. Simple solution is to shorten the name of the file. Example: "CCRX_CRXFilamentGuideV3.gcode" will not show up "FilGuide.gcode" will show up Just wanted to save people a headache if they have the same issue 🙂
  • Create New...