Jump to content

ewad

Dormant
  • Posts

    4
  • Joined

  • Last visited

Posts posted by ewad

  1. I might try switching the printcore.

     

    What I don't get is.This model is fairly large (13cm x 13cm) how can it be it's able to print the outside walls fine, while the inside gets underextruded? It's almost the same distance, acceleration and speed the printer has to go through on the in- and outside walls.

     

    And yes I could try adjusting the different speeds, but shouldn't the printer be able to print With the stock ultimaker settings in cura.

    I didn't mention this in the beginning, but it's not a problem that happens all the time, it may happen every 10-15 print.
    I think it happens on straight walls. 

     

    We have an ultimaker 2+e also and we never had an issue like this with that printer. 

  2. Hey all 

    At my work we have an Ultimaker 3e  and we have had some problems it. 

    at the moment we have a problem we cant seem to find the solution for. 
    Sometimes a print will get wierd looking underextruded walls in model specific places. At the pictures the problem is shown on the indside walls, while the outside walls looks fine.  
    we use PLA and the stock settings for ultimaker 3e in cura.
    To me it looks like a softeware issue, but im not sure. 
     

     

     

    IMG_20190709_145504.jpg

    IMG_20190709_145547.jpg

    IMG_20190709_145625.jpg

    IMG_20190709_145741.jpg

    IMG_20190709_145830.jpg

    IMG_20190709_145858.jpg

×
×
  • Create New...