Jump to content

DBVOLA

Member
 View Profile  See their activity

  • Posts

    22

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by DBVOLA

  1. DBVOLA
    "google is your friend" 🙂 No. I haven't.
  2. DBVOLA
    I found this: (See pic) It works for me.
  3. DBVOLA
    Thanks. That works 🙂 All i need now, is to have my admin come every morning, and start Cura on my pc 😕
  4. DBVOLA
    We (VOLA R&D) have the same setup. But no macro. And we have the same problem. 70 to 80% of the imported files fails. And ther dont seam to be a pattern! What do we do???
  5. DBVOLA
    I found an old spool of I180. Prints fine. And clean glass bed is good.
  6. DBVOLA
    SandervG: "Like you might get away by saying it is iGus I150 instead. Let me check!"
  7. DBVOLA
    Any news on the I180 and the Material Station?
  8. DBVOLA
  9. DBVOLA
    We are having the same problem. Ultimaker Cura 4.12 and 4.13 Solidworks 2020 and 2021 Plugin: CuraSolidworksPlugin
  10. DBVOLA
    Thanks. We rarely use support. But when we do. We use PVA.
  11. DBVOLA
    We use Ultrafuse PET for the simple reason, that we found it to be the best all-around material for making fixtures and prototypes. Dimensional accuracy is of great importance. And it has good layer adhesion. Here are some of our prints.
  12. DBVOLA
    Hi. Yes. That's the profile. We could share some pictures. How do you want them?
  13. DBVOLA
    We are having the problem with the cam going black, during long printjobs. When can we expect is to be fixed?
  14. DBVOLA
    We use loads of BASF Ultrafuse PET. But we use the CPE profile. The S5 Pro Bundel has a Ultrafuse PET profile. But it dos not work.
  15. DBVOLA
    His fingers got dirty 😄 We expected a improvement with the new firmware. But no...
  16. DBVOLA
    It happened to my colleague today 😖 It came with a lot of swearing... We are on the latest firmware.
  17. DBVOLA
    We are printing 90 % PET. We clean out two times per print job.
  18. DBVOLA
    We (R&D dep.) returned our first Material Station in December. Then we bought a new one in February. The new one have less issues. But the software / firmware still needs some work.
  19. DBVOLA
    Hi We are doing 5 to 8 prints a week. And this has happened 3 times in the last two weeks. We will be looking forward to the update.
  20. DBVOLA
    I've checked out the two other posts on this topic. But i don't see any indications of Ultimaker working on solving the problem 🧐
  21. DBVOLA
    And again this morning 😟 is it really necessary to prime so much filament beside the buildplate?
  22. DBVOLA
    After we installed a Ultimaker Material Station, we been having problems with the priming filament getting stuck in the S5 Z-axes lead screw. Is there a fix coming for this problem?
×
×
  • Create New...