Jimboski

After upgrading to Cura my models no longer print properly. My CR10S pauses intermittentaly for up to 5 seconds at different times. I am running on IOS and use Octoprint. Here is what I have done to trouble shoot the issue so far. I first noticed the pauses happen at the same place in different models so it is not a random event. I currently use Octoprint so removed my PI and printed directly from and SD card and still see the same issue. I looked at the terminal and i can see commands sent but do not get an acknowledgement quickly. This led me to think it was a network issue but it is not. I tried printing the same model I had saved that was from Gcode that was sliced with Cura 3.6 and it worked perfectly without the pause errors I tried using a different slicer - Slic3R and the error goes away. I also tried uninstalling and reseting 4.1 but I get the same error. From everything I can tell this is an issue with the STL file after slicing with 4.1 - If possible I would like to get a link to the IOS version of 3.6 or another previous version of Cura to get me by until I get 4.1 working unless there is something else I can try. Any help is appreciated.