Jump to content
Ultimaker Community of 3D Printing Experts

onkytonk

Member
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. My first print with Cura 4.2.1 didn't insert the correct temperatures. I inserted the old gcode, tested, and it worked. I repasted the cura 4.2 start code, and tested - and then the temps worked. Don't know what happened to fix it.
  2. I've noticed that with Cura 4.2, my temps did not get set on my printer. When checking the Start Gcode, there is nothing to set the temps. I've realised the start gcode from 4.2 is quite different to 4.0. Should I be adding the temp gcode from Cura 4.0 into my start gcode in 4.2? Cura 4.0: ; Ender 3 Custom Start G-code M104 S{material_print_temperature_layer_0} ; Set Extruder temperature M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature M109 S{material_print_temperature_layer_0} ; Wait for Ex
  3. Thank you. Is there any way to change the formula, like nozzle_diameter_size*1.2 for example.
  4. Hi there, I recently switched to Cura 4.2. If I use default profiles, and change the nozzle size, the line width automatically adapts. If I then change the line width manually, it shows the setting as something like: “=nozzle_width_diameter*1.1”. So it seems line width is somehow dynamic for the default profiles. Is there anyway to retain this behaviour on my custom profiles? Thanks.
×
×
  • Create New...