Hello Developers,
recently I found a missing option in the printer menu of the UM3 extended - so I have to switch the printer on and off again to be able to continue.
The situation:
Installed is a AA print core and a pla-filament spool.
Now I change the pla-spool to a pva one using the spool-unload/load option of the firmware-menu.
After placing the pva-spool and pressing the confirm-button a message appears, telling me, that the actual print core is not suited for this kind of filament.
And here comes the bug: The only option I have now, is just to confirm this message and to continue loading the filament into the wrong core. That does not make any sense to me.
What I would expect here: Either a question like: "Do You want to change the core to a BB one? (yes/no)" and then initiate the core change procedure. Or some kind of "Go back"-button, so I could at least navigate back the menu and then go to "change core" and so on.
Until now I helped me by switching the printer off and on again and first change the core then the spool.
Thank You in advance of taking notice and hopefully changing this.
Best regards,
Daniel