twmcelveen

Awesome. Thanks for all your help!

Ok, printing through safe mode does NOT send the wrong temps. Think I should uninstall all the plugins and then reinstall them one by one?

Hmm, you're right, I don't see it in the gcode file when I export it out of Cura? ;FLAVOR:Marlin ;TIME:49134 ;Filament used: 17.9428m ;Layer height: 0.1 ;MINX:21.415 ;MINY:36.828 ;MINZ:0.3 ;MAXX:178.589 ;MAXY:163.172 ;MAXZ:39.8 ;Generated with Cura_SteamEngine 4.3.0 M140 S65 M105 M190 S65 M104 S210 M105 M109 S210 M82 ;absolute extrusion mode G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode G28 ; home all axes G29 ;bed levelling G1 Z0.2 F1200 ; raise nozzle G92 E0 ; reset extrusion distance G1 X10 ; move X-carriage 10mm to prep for wipe G1 Y100 E12 F600 ; purge nozzle & wipe G92 E0 ; reset extrusion distance from wipe action M900 K.07 ;set K-factor PLA M107 M117 Printing... G92 E0 G92 E0 G1 F2400 E-2.5 ;LAYER_COUNT:396 ;LAYER:0 M107 G0 F3600 X59.607 Y39.25 Z0.3 ;TYPE:SKIRT G1 F2400 E0 G1 F1200 X59.646 Y39.211 E0.00275

For some reason I can't figure out, Cura is turning the extruder temp and bed temp to zero after bed leveling and during the first layer of my print. I tested by printing with a temp tower gcode from Thingiverse so as to bypass Cura and it printed fine. I'm sure it's not in my start code, I disabled almost all of it to double check. I pulled the code from terminal in Octoprint and it's throwing a M140 and M104 S0...but why? Recv: Bilinear Leveling Grid: Recv: 0 1 2 Recv: 0 -0.286 +0.141 +0.555 Recv: 1 -0.367 -0.003 +0.374 Recv: 2 -0.480 -0.132 +0.162 Recv: Recv: Subdivided with CATMULL ROM Leveling Grid: Recv: 0 1 2 3 4 5 6 Recv: 0 -0.28625 -0.14324 -0.00023 +0.14125 +0.28019 +0.41759 +0.55500 Recv: 1 -0.31218 -0.17710 -0.04202 +0.09282 +0.22727 +0.36148 +0.49569 Recv: 2 -0.33810 -0.21095 -0.08380 +0.04440 +0.17436 +0.30537 +0.43639 Recv: 3 -0.36750 -0.24625 -0.12500 -0.00250 +0.12208 +0.24792 +0.37375 Recv: 4 -0.40269 -0.28395 -0.16521 -0.04685 +0.07087 +0.18821 +0.30556 Recv: 5 -0.44134 -0.32308 -0.20483 -0.08968 +0.02030 +0.12716 +0.23403 Recv: 6 -0.48000 -0.36222 -0.24444 -0.13250 -0.03028 +0.06611 +0.16250 Recv: Recv: X:102.00 Y:200.00 Z:17.42 E:3204.68 Count X:16320 Y:32000 Z:13840 Recv: ok Send: N15 M140 S0*81 Recv: T:203.00 /205.00 B:64.50 /65.00 @:86 B@:127 Recv: ok Send: N16 M104 S0*82 Recv: ok