Merls

Hello, I'm new at this tipe of things so I don't really know what I'm doing... but could anyone help me with this problem? 1) the printer stops and parks well at the specified point 2) you can resume using the menu 3) the printer goes perfectly to the next point to restart and starts to move 4) but with no extrusion, so it prints nothing 5) when you pause and ask to extrude a bit it does, but when you resume there is still no fillament extruding Im using Ultimaker Cura V 4.3.0 A BeeveryCreative B2X300 printer A SD-card I opened the cura file in txt. and this is what it is written in the "pause at height" part: ;TYPE:CUSTOM ;added code by post processing ;script: PauseAtHeight.py ;current layer: 54 M83 ; switch to relative E values for any needed retraction G1 F300 Z22.9 ; move up a millimeter to get out of the way G1 F9000 X190 Y190 M104 S0 ; standby temperature M0 ; Do the actual pause M109 S200 ; resume temperature G1 F9000 X-8.032 Y-8.282 G1 F300 Z21.9 ; move back down to resume height G1 F9000 M82 ; switch back to absolute E values G92 E366.06703 ;LAYER:54