Jaka3d

Is there any information, if or when we could expect Ultimaker Cura to support Makerbot Method printers? MakerBot Cloud slicer has some nice features but it can't compare to Cura.

@gr5 Can you help me? I have bricked S5R1. I want to recovery firmware with few different recovery images (official Ultimaker and yours) but unsuccessful. If I used "official" Ultimaker recovery file um-restore-5.7.2-R1 nothing happened (display shows penguin). If I used your recovery file gr-S5-R1 or um-restore-6.4.0-R1-gr recovering started, but stayed in "about 2 minutes remaining" forever. Is there any solution to resolve the problem?

Hi everybody, I have one question for those who prints on demand for your customers (not friend - printing per litres 😄 ). What is your cost per hour for printing on yours Ultimaker S series machines with different materials (PLA, ABS, Nylon GF, with/without support) and how do you calculate price for printing?

Hi everyone, i have one problem (I hope i'll describe a problem reasonably - I'm not very good in English) Question is: Is there any solution to make my own profile for my own material (which is not a default material type) I want to make profile for ASA material, from a local manufacturer. In Cura, I Duplicated "Generic ABS" material and changed it: Display name: ASA Green Brand: YYY Material type: ASA Set green color Unlink Material Then I restarted Cura. In my printer, I got new material, everything as i wanted (Brand name:YYY/ Material type:ASA /Color:Green) Problem appeared in Cura ASA is not default Ultimaker material type I don't have any intent or custom profile for ASA. I can't even make it. Is there any solution? I understand, ASA is similar to ABS and i can left material type to ABS and everything will work OK (Intent profiles for ABS stay) but with this printer (Ultimaker Pro bundle) work several people and I don't want any shortcuts (ASA is ASA, not ABS 😄 ). We want to have all things cleared.

Once, when i wanted to print a ball, i cut the 3d model to 4 pieces (quarters) and print it. I rotated every piece for 45° i got very pretty outer surface (need of support structure due to small conntact area to the buildplate). Then I glued all pieces together (use holes/pins/slots) and it was very nice resoult, prepaired to postprocessing.

My advice: Rotate model for 90° in X or Y axis and you'll get better results. In your situation, i would rotate model for 90° (Left surface (on your image) align to the build plate).

Hi everyone, I just bought Ultrafuse 316L but I can't load profile from marketplace on my Ultimaker S3. On S5 it works, but on S3 there isn't any option to choose Ultrafuse 316l material (other Basf materials works ok). Is this material compatible only for Ultimaker S5 and not for S3?