mclareniak

Hello. So I found out that in Cura I set the speeds as follows: first layer 25mm / s and other 50mm / s. But the printer prints everything at 25mm / s. Can't you tell me where it's wrong? Well thank you.

Now I understand. So it pushes at 50, but when I select 50 on the display, it actually pushes 25. Thanks for the explanation.

So, the temperatures work, but the hotbed first heats up and then the hotend heats up. Here it is written https://community.ultimaker.com/topic/26391-start-heating-bed-and-extruder-and-level-bed-at-the-same-time/ I still have to find out why he is not pushing at 50 but at 100.

Yes, I'm set to Marlin. I attach G-code, maybe it will help to locate my problem. 2xph-25_PEG.gcode

Hello. Excuse my weak English, I use a translator. I have a problem with my CR-10S PRO. I'm printing from a MicroSD card. The printer does not download all the settings I set in Cura. For example, the hotend temperature and print speed, I have to set the printer before each print. In Cura I have set the temperature for the first layer of 200 ° C and for the other layers the same. When I enter to print, the temperature is 0 ° C and I have to manually set 200. In Cura I have set the print speed to 50, but the printer is set to 100 and I have to manually set 50. In Cura it is possible to set different versions of G-code. Which is right for my CR-10S PRO? Thank you for your willingness.