Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Everything posted by ramsesiden

  1. Sorry for the delay, it was xmas and I was with my family merry xmas to all of you, here are the gcode files and images, in case of cura-mb-master and Cura 4.4.1 I'm using nozzle switch in 50 instead of 60 as it was in the orginal custom Klipper configuration Im using, other settings are the same. TT_T800_Cura-mb-master latest version.gcode TT_T800_Cura4.1.gcode TT_T800_Cura4.4.1.gcode
  2. Hello @burtoogle it is not only for that print you can test with any print using Cura 4.1 vs Cura 4.4.1 , Octoprint and Klipper using a Klipper profile, I can send you both profiles for Klipper if you need, you can test it with any print and you will see the big difference
  3. speed of the print you can see in the 3rd image with Cura 4.1, I can print that project in 3h 17m in Cura 4.4.1 it estimate to print the same project in 16h 37m, I already tested the estimation in Cura 4.2 and it was extremely slow printing, it looks like it was only made for Marlin, in case of Cura 4.1 it perfectly works with Marlin and Klipper
  4. Ive installed the the custom compiled Cura-MB-Master and Cura 4.4.1 both are failing to show older custom profiles, and it looks like it is still extremely slow
  5. Hi guys, I think you have the best slicer software, I've been using Cura since version 3, in fact I didn't want to swap to Cura 4, then I saw it was faster without slicing anytime you change settings, but since Cura 4.2 it is not supporting Klipper, I'm using Klipper in both of my printers Ender 3 and Tevo Tarantula, but anytime I install Cura 4.2 or 4.4 or any version after 4.1 it makes a lot of changes and my custom profiles are removed for Ender 3 and it makes me work with the default profile, even when I create a new custom profile, 1st I cannot name it as the old profile, in this case I h
  • Create New...