Jump to content

ramsesiden

Dormant
  • Posts

    5
  • Joined

  • Last visited

Posts posted by ramsesiden

  1. On 12/25/2019 at 3:11 AM, burtoogle said:

    I don't have Cura 4.1 installed so please provide the gcode for comparison. Any print that shows the slowdown will do.

    Sorry for the delay, it was xmas and I was with my family merry xmas to all of you, here are the gcode files and images, in case of cura-mb-master and Cura 4.4.1 I'm using nozzle switch in 50 instead of 60 as it was in the orginal custom Klipper configuration Im using, other settings are the same. 

    Cura 4.4.1.png

    Cura 4.1.png

    Cura-mb-master.png

    TT_T800_Cura-mb-master latest version.gcode TT_T800_Cura4.1.gcode TT_T800_Cura4.4.1.gcode

  2. 2 hours ago, burtoogle said:

    As far as profiles and all that jazz go, my mb-master builds are going to behave the same as the UM builds because I don't fiddle with that part of Cura. When you say extremely slow are you referring to the speed of Cura itself or the speed of the print? Can you provide a project file that illustrates the problem?

    speed of the print you can see in the 3rd image with Cura 4.1, I can print that project in 3h 17m in Cura 4.4.1 it estimate to print the same project in 16h 37m, I already tested the estimation in Cura 4.2 and it was extremely slow printing, it looks like it was only made for Marlin, in case of Cura 4.1 it perfectly works with Marlin and Klipper

  3. Hi guys, I think you have the best slicer software, I've been using Cura since version 3, in fact I didn't want to swap to Cura 4, then I saw it was faster without slicing anytime you change settings, but since Cura 4.2 it is not supporting Klipper, I'm using Klipper in both of my printers Ender 3 and Tevo Tarantula, but anytime I install Cura 4.2 or 4.4 or any version after 4.1 it makes a lot of changes and my custom profiles are removed for Ender 3 and it makes me work with the default profile, even when I create a new custom profile, 1st I cannot name it as the old profile, in this case I had to rename Klipper 2019 to Klipper 2019. and even when I create the new profile it doesn't work with the settings for Klipper, it is a lot slower, even in my Tevo Tarantula where it preserve the old profiles it works a lot slower, please take a look to the images, until now I have to use only Cura 4.1 because none of the newer versions work with Klipper firmware besides they remove older custom profiles for Ender 3

    screenshot.png

    screenshot.png

    screenshot.png

×
×
  • Create New...