Jump to content

Sanych

Dormant
  • Posts

    21
  • Joined

  • Last visited

Posts posted by Sanych

  1. Dear @ahoeben.
     

    I never said that you owe me help. Moreover, I wrote to the community only because I hoped that someone knew the solution to my problem. I just switched from Windows 7 to Windows 10 and from Cura 3.6.0 to Cura 4.4.1 at the same time and thought that all these are Windows errors.

    Sorry if you have the impression that I commit you to solve my problems.


    But it seems to me that it would be right if someone said: "We know about your problem, but we are busy with other important problems." But it is possible that in this I am also wrong.


    Sorry.

  2. Dear @ahoeben.

    I correctly understood that it is you who are engaged in mistakes in the Cura? If so, then this is what happens to me. If not, please tell me whom I should contact with my problem.

     

    I uninstalled, cleaned, and reinstalled Cura 4.4.1. And, even after you kindly fixed the Materials plugin, I ran into the following problem.

    I created two printers in the program. Ultimaker and Tevo Black Widow, which I use. When I activate Ultimaker printer, all materials are displayed normally and your plugin works. When I activate Tevo Black Widowt, all materials disappear, and the plugin stops working.

    If you are not dealing with this problem, then maybe you will be so kind and forward my message to the correct destination?

    2123666594_ScreenshotCuraUlti.thumb.png.dd4814f729b00415d387fab1057f4f63.png

    Screenshot Cura Tevo.png

  3. Уважаемый @ahoeben

    Удалил, очистил и переустановил Cura 4.4.1 Я нашел, в чём содержится проблема! Когда я устанавливаю и активирую принтер Ultimaker, то всё отлично отображается и работает. Но, когда я переключаю на принтер TEVO Black Widow (а у меня именно такой) - пропадают установленные материалы и перестает работать plugin. Стоит поменять принтер обратно и все в порядке.

  4. Уважаемый DivingDuck.

    Сравните два screenshots. Первый -мой, второй-ваш.  Вот она - проблема! Я подготовлюсь и переустановлю Cura 4.4.1 ещё раз. После этого сообщу о результате. Спасибо за желание помочь.
    @ahoeben Извините, я не слишком хорошо разобрался в иерархии участников разговора и пишу тому, кто мне отвечает.
     

    Cura 441_1.jpg

    CuraMaterials 4_4_1.png

  5. DivingDuck пишет: "Now, when you push the create button, in first instance nothing will happen. But when you leaf the material dialog completely, select an other menu item in Preferences and then go back to Materials menu you will find  a new PLA material under the entry "Custom". У меня такое на происходит

  6. Уважаемый ahoeben.

    Давайте попробуем с другой стороны. Может быть это поможет?



    Вы обратили внимание на мой предыдущий комментарий? Тот, который с картинкой? На картинке нет ни одного материала, который Cura создаёт по умолчанию. 

    Так должно быть? Почему такое происходит?

  7. Уважаемый  DivingDuck  . Очень хочу вам помочь. Но, "трудности перевода", никак не могу понять смысл сказанного вами после слов:  "Generic PETG and push the create button and became immediately a new generic material." Может быть вы сможете разместить серию картинок? Что я должен повторить?

    Так же хочу обратить ваше внимание. После инсталляции программы у меня в списках нет ни одного материала от Cura.

     

    Cura 441_1.jpg

  8. On 22.01.2020 at 14:03, DivingDuck said:

    Появилось обновление для настроек материалов плагина. Вы уже обновили свой плагин?

     

    Здравствуйте, DivingDuck.

     

    Да. Я обновил свой плагин, после чего появилась возможность корректно переименовывать материалы. А вот возможность создания новый материалов НЕ появилась.

    Свои действия я описал в предыдущем ответе: "Настройки> Настройки видимости Настройка> Материалы> Создать". Может быть у вас есть какой то совет для меня?

    У меня установлена Windows 10 64 бит. Работает без проблем. Когда я устанавливаю Cura 3.6.0, она легко создаёт материалы.

  9. Добрый день.
     

    Я выбираю по очереди: Настройки> Настройки видимости Configure> Материалы> Создать


    Новый материал не создан. Мне грустно.

  10. 3 hours ago, DivingDuck said:

    Вы установили плагин «Настройки материала»? Если да, отключите временный плагин для переименования, удаления и т. Д.

     

    Respected DivingDuck!
     

    Agree, it’s a little awkward to scratch your left ear with your right hand. 🙂
    And by the way, this does not help.

    I have a feeling that the new versions have more features and twice as many bugs.

  11. Good day, everyone.

    Trying to rename a material profile. I press F2 - there is no reaction. Only from the menu.

     

    The profile is called “PLA FDPlast C”, where “C” means “Correct”. In the menu, select "Rename", delete C ", press Enter. The system removes C, adding" # 2 ".

    Rename. Delete # 2. Appears # 3

     

    Please note that other profiles with similar names are not listed.

  12. Hello.

    I apologize in advance: I do not know English well and I write through a google translator.
     

    Cura 4.4.1 I want to create new material. Options> Parameter Visibility> Materials> Create. And nothing...

    In Сura 3.6.0 everything was just great. Windows 10. All previous installations of Syrah removed and cleaned the registry. The result is negative.

    Could you please help me.

    Cura 441.jpg

×
×
  • Create New...