Hisham

So in your opinion, the problem is not my STL files but either my CURA settings or the problems is in my physical printer itself?

@mikepasquale1 Thanks. In the attachment is the stl and the gcode. It's generous of you if you can help analyze the files. Thanks again (y) CFFFP_Depan Atas 4.gcode Depan Atas 4.stl

Hi everyone. Each time the design of my file change from straight shape and spread into other angle, the printing line will skips and ruining my printing. If you see both picture shown that there is a line breaking from below/previous layer(this most of the time will make the print unstable and will breaks mid print!). I checked the files in Preview mode in Cura 4.4. When I choose to see in Layer Thickness Color Scheme, it shown that at exactly the place where the problem occurred, the color scheme changed from yellow(thick layer) into blue(thinner layer), so I guess this happen because of the printer starting to print with different layer thickness so that is why it breaks. I have tried to disable 'Use Adaptive Layers' function in Experimental tab to try making the layer stay consistent in thickness throughout the entire print, but the problem still happening. So what I am missing here? Thanks in advance.