Bpositivedotdk

Yes, this is quite annoying - still happening in 5.1 beta!

Thanks for the reply. It is not because of minimum layer time. - I have adjustet this setting already and it would also show up in the preview. If you look at the video, it is random speed changes.

With some interlocking parts I needed to use the "horizontal expansion" to get a proper fit. However there seems to be a bug in Cura 4.12.1. The print time goes up quite a bit, for example 38 to 45m for just a expansion of 0.1mm. Also it makes random speed changes when printing..... so what should be a constant speed of 60mm becomes some weird motion between 30 and 60!! You can see a video of it here: https://www.dropbox.com/s/e8647584r5yheui/20211215_213829.mp4?dl=0

Hi. I think for some designs and models, it would be very neat to have the ability to have a random starting point, and still have the settings to hide that seam in a corner.

Okay so the problem is described here: https://github.com/Ultimaker/Cura/issues/8229 Still think the old solution was much better!!!

In Cura 4.7.1 all my profiles went missing and I can't import them form 4.5. (It shows a dialog box "Successfully imported profile.....!" - But it does show up after!!! ... Also creating a new profile doesn't work!

Thanks Torgeir. Oh that's too bad, guess I'll have to by a new one.

Can I use the original stepper motor from the feeder, in the y-axis? (It's slightly longer, but should not be a problem!)