Jump to content

tigercjn

Member
  • Posts

    5
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Other 3D printer

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

tigercjn's Achievements

0

Reputation

  1. Could you just insert a T1 at the end of your custom Gcode? The T1 at the top gets changed to a TO straight away anyway, so it's not really doing anything. At the end of your custom, it's printing on T0, so if You add a T1, it should print with that, I assume.
  2. ;Start GCode Extruder right begin M140 S70.0 ;Start heating bed M104 T1 S225.0 ;Start heating extruder M190 T1 S70.0 ; Start heating the bed, wait until target temperature reached M109 T1 S220.0 ; Finish heating the nozzle ;Start GCode Extruder right End
  3. I know this topic is old, but I have the same problem. Cura puts this in before the temps in the startup definition. My question is how to stop them as they are not needed as the temps are set in the printer/extruder setups. ;Generated with Cura_SteamEngine 5.6.0 T1 M140 S70 M105 M190 S70 M104 S220 M105 M109 S220 M82 ;absolute extrusion mode ; ; ABOVE this line is generated by cura before the printe
  4. Thanks for sharing, this will be very useful when my printer arrives.
  5. Here is the Snapmaker 1 settings, the printhead would be similar I guess on the Snapmaker 2.
×
×
  • Create New...