canozerdem
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by canozerdem
-
-
I was thinking something along the lines of
Profile 0.1
Infil 20%
Support: Enabled
Adhesion: Disabled
Quality Layer Height: 0.1mm
Shell Wall Thickness: 1.05mm
Wall Line Count: 3
Top Bottom Thickness: 0.8mm
Top Thickness: 0.8mm
Top Layers: 8
Bottom Thickness: 0.8mm
Bottom Layers: 8
Horizontal Expansion: 0mm
Material: Enable Retraction
Print Speed: 50mm/s
Support: Enabled
Support Placement: Everywhere
Support Overhang Angle: 50
-
Hi Guys
Im currently an architecture student and was thinking of 3D printing a model this week. I have attached a sketchup image of the model I will be 3d printing but was wondering if anyone would want to help me with the best quality settings for a Ultimaker 2+ 3d printer. This will be used for my final presentation thus I would want it to look as crisp as possible however I have never used the 3D printers before.
Help with Settings
in Industries
Posted
@tinkergnome The model will be re scaled so it will be much bigger, and yes unfortunately the model is not supposed to look like that and was wondering what the reason might be as everything seems fine on the sketchup model. Sorry im really new to the 3d printing scene