Jump to content

jateu01

Dormant
  • Posts

    2
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Other 3D printer

jateu01's Achievements

2

Reputation

  1. Hi All, Really odd issue happening. I'm using cura to slice. The problem is that the vertical side(red) is narrower than to when this item has a straight square side. I've used the green line to represent the build surface or part. As you can see with STL this part it's vertical not curved or chamfered etc. As I am using ASA the initial layer speed is very slow to get adhesion and z axis is lowered slightly on printer manually. Bed temp 100° Filament temp 240° Initial print speed 5-10 Other layers print speed 30 Retraction 2mm/35mms No cooling In a cabinet to keep warm Can't think of any other info. But this is weird Many thanks z_drive_main_b_x2.stl
  2. Hi All, I have very little experience with 3d printing, However our NHS will be hitting crisis point with an increase in coronavirus related deaths due to respiratory issues. One thing that has been mentioned by the British Government is that the UK's NHS will run out of precious ventilators. The government has asked for various engineering companies to retool but that is easier said than done. However we as 3d printer owners can produce very complex printed items in hours. I know this is a long shot but surely we can help in some way. Again I need the community to help with this I have very little experience but want this to work. I'm more than happy for my printer to be used round to clock for the benefit of our vulnerable citizens, I can start a crowd funder to help us and this is purely non profit. But also this project should be made open source as it should be passed to the rest of humanity. As I understand it a ventilator basically increases the respiration rate of a patient struggling. it can do this via pressure flow and increased oxygen saturation. All these requirements etc and more can be handled by a raspberry pie, motor or actuator, bellows and housing. I do not have face book etc so I need everyone out there to get their feelers out and find anyone who can help us. please pass this on and see where we can get it. I need ideas and more importantly criticism. My Email is jateu01@googlemail.com Many thanks for your help and time. James
×
×
  • Create New...