Jump to content

0maquina

Dormant
  • Posts

    5
  • Joined

  • Last visited

0maquina's Achievements

0

Reputation

  1. hey It's working!!! I did not understand how it may have lost this calibration. thanks a lot!!!
  2. I update the first time by wifi and has begin the problem, in second time I updat form usb but the situation it's the same. I add 3 shorts videos, so you can see what'up: -start print (slam limits and wrong middel position) -calibration nozzle (try to rise up the nozzle 2 from the left side ) -abort print S5_video.zip
  3. -the limits are ok, I checked one by one, they are not broken or blocked, they give me an opening and closing signal -the axis are ok too, no damaged all hardware it's ok, i'm sure! -I reset Cura but the situation is the same. when I try to print, the setup starts from left to right and tries to release the extruder 2 from the other side (left) it seems as if the "X" axis is inverted ... I don't know what to say the only thing I did was to update the firmware to 5.5.12 yesterday in the morning
  4. Hi what did you mean with "Cura Connect Reset"? I did the reset Cura, but with any change, I deleted all files and reinstalled a old version, then a new version, but it's the same. I did the factory reset on the S5 but the situation does not change, when I start the machine, the extruder setup starts from the "left corner", slams the limit several times, then tries to print by moving to a position that is not in the middle ... I don't understand
  5. dear all I bought an S5 7 months ago, I have had various problems since the beginning and the technical service has not yet been able to solve them. the worst happens today, I'm working for valves for hospitals, for the Covid19 emergency in Spain, this morning I do a firmware update, and the machine has stopped working, it is no longer possible to calibrate, it seems to interpret the inverted axes , calibrates from left to right and is unable to raise and lower extruder 2, a disaster I would like to do a firmware downgrade, but my tencion service does not help me. I read in this post that it is possible, where I can download or receive the file. thank you very much I'm very hurry.
×
×
  • Create New...