Hi all,
First time on the forum and very new to 3D printing!
I have an UM2+ Extended that I've been using a lot for smaller prints and all has worked out great so far.
Today I have made a design that is pretty big: 21.05cm x 18.06cm x 34mm. So, wide and deep but not very high.
According to the specs of the UM2+ Extended, I should be able to print this as far as I can see. However, Cura shows it to me as too large to print.
I've read here https://ultimaker.com/en/resources/44677-maximum-build-volume-ultimaker-2-plus-ultimaker-3
that some settings might prohibit the full volume of the printer to be used, but I've downloaded the 'max' volume profile but it still doesn't seem to want to accept it.
Under 'option 3' there is an example file that is configured correctly that has a cilinder in it "they are pre-loaded with a huge cylinder to show the maximum build volume you can achieve." Why is this a cilinder and not a full rectangular block? 🙂
Hope it's not too much of a stupid question and somebody can help me out! I'll attach the STL file for reference.
Thanks!
Cheers,
Jens
power supply 12V-24V.stl
