Jump to content

dadoblu_2000

Member
  • Posts

    26
  • Joined

  • Last visited

Everything posted by dadoblu_2000

  1. Hi, I would like to buy new bearings for the ultimaker s3 print head, can you tell me the code and measurements of the two bearings? Thank you
  2. CIAO @ ansonl il file head_bottom_repaired.stl quando lo carico nel mio programma slicer sembra non essere visibile, indica che le superfici sono troppo sottili, tutti gli altri modelli le caricano correttamente, inoltre è possibile avere una guida su come stampare il cartella modelli "parti master da stampare"
  3. hello @yyh1002 I worked on your project I wanted to do it for a long time but mandatory commitments did not allow me to complete it, I finally managed to complete it, I wanted to ask you if you have any profiles for ultimaker cura, simplification3d or Kisslicer that I can share, i'm trying to adjust the XY axes and i seem to have succeeded the combs are well aligned, i have no idea how to do it in Z, i can't figure it out, i just adjust the nozzle via the display, after the adjustments i tried reprinting the attachment models with Polycarbonate and Pva I wanted to try to see how they would come out but I noticed that during printing I encountered a problem of non-alignment between the two prints, even if in the adjustment phase the comb models are printed perfectly Can you advise me on what could be the problem that I can't see?
  4. Hello everyone, I would like to replace my original ultimaker card with a duet2 wifi already in my possession with its 7-inch monitor, I would like to know if there is a guideline to be able to configure the card considering that my printer is equipped with a double extruder mod DXU and I would like to keep it, can you help me?
  5. Ciao @yyh1002 I have inaccurate values in the temperature reading, it is possible to have the factory values for 24v 35w resistance and for pt100 temperature probe in order to compare them with those I have, I tried to do the PID config, the values are different between hotend 1 and hotend 2 is normal? in addition, I find that if I set the same temperature between the two hotends, the filament has a different viscosity, let me explain better, I mold with the same filament, same brand, same color, hotend 1 and 2, from hotend 1 the filament comes out beautifully fluid as it should be, while in hotend 2 less fluid comes out, but the temperatures are identical according to the display, at the moment I don't have an infrared thermometer to be able to check the real temperature.
  6. how do i adjust the docking position? when I switch from extruder 2 to extruder 1 the lever moves but does not get stuck and therefore it releases, I have to make the lever run longer but I don't know where to find the values that regulate the transition from extruder 2 to extruder 1.
  7. make sure the site is the right one, have had problems with sites trying to copy their portal, this is what I use https://www.superbuy.com/en/ if you can't contact customer service they will help you
  8. someone can explain to me how to perform XY calibration, I just can't figure out how to do it
  9. Yes, thank you very much, I had not thought of checking the menu of the printout, I am also making the modification to the extruder doing the B2D, the steppers relating to the motor are already set in the DXU firmware or I have to replace them based on the formula you indicate in the project and above all how do I insert them permanently in the firmware?
  10. I made the change to dxu but the second extruder turns in the opposite direction how can I change the direction of rotation?
  11. hello, yes Chinese is difficult, you can use eighth notes and use an online translator, after this you use superbuy or any other brokerage service, they think all their international shipments, I'm just waiting for the goods purchased for modification to arrive to DXU via DHL
  12. I on aliexpress have failed. finding them and a few that I found cost 10 times more, so I got the acquired on taobao, I simply registered an account on taobao and then I entrusted to superbuy, I choose the product that buys it for me, I pay my order and I speeded up by reliable and fast express courier service.
  13. Hi Torgeir, can you give us a link where you can download Cura 15.04.5 or tell me where to find it, you intrigued me and I want to test it thanks
  14. when you talk about Cura 15.04.5 do you reverence at cura 4.5? because I am actually using this version and I am much better than caura 4.6.1, at the moment I am printing PC components and I must say that with care 4.5 I find a better composition than with care 4.6.1, s3d works well I downloaded the profile from the Polimaker website and I have to say that I don't find any difficulties at the moment, I am printing the DXU modification to transform my UM2 + into a double extruder. thank you very much for the advice.
  15. my own idea, only that I wanted to use a mosfet to control the heated floor, but it would seem that it does not solve the problem
  16. I am not very practical about s3d but I would like to understand how it works, there are some things I prefer compared to care such as inserting the supports, if you want you can share your profiles with me in order to facilitate things, without being there to test everything .
  17. ok thanks for the information, I wanted to ask you if you had tried to make prints with different slicer programs, for example I tried simplify3d and I noticed that the walls are printed much more linear and I also noticed that the noise of the stepper motors changes as if the current that came to him was modified by the program is it possible or are they just my fantasies?
  18. thanks for your offer of construction of the component but I write from overseas I am in Italy, I find it difficult to change the firmware, where can I find the file?
  19. a really nice job, considering the dual extruder DXU upgrade that I want to deal with if you want to replicate your project in my printer can you tell me if the components can be found on the market and / or if they must be assembled by yourself?
  20. using a separate 24v power supply and a mosfet that controls the hot plate is it possible to solve the wobble defect?
  21. I don't think they ship to Italy, besides the fans are turbines, not the radials
  22. the 3510 12v fans are nowhere to be found, they cost more than the printer, do you have any idea where to find them or if it is possible to put 5v fans?
×
×
  • Create New...