Wrangel

Our Ultimaker came with a low viscositiy lubrication for the x/y axis and a high viscositiy grease for the z axis. After i got frustrated i uses the low viscositiy lubrication for the z axis as well. I don't know whether this approach cleaned the axis or actualy worked better as a lubricat but it seems to have fixed the problems at least temporarily.

Hi everyone, our 3D printer is recently stopping printing from time to time. It simply freezes during printing. Often, but not always, ist shows the Error16: " The z axis ist stuck or the limit switch is broken." However, the limit switch seems to work fine. The homing of the build plate never fails and the activ leveling also works. No damage or jamming is visible on the z-axis or the swich itself. We have also reset the printer and lubricatet all the axes. We have also cleaned ist, so that no particels can block the axis or the switch. Does anyone have any clue? Thanks in advance! flow_Ultimaker-00598d.log ultimakersystem-ccbdd300598d.5.2.11.20190503.boot-1.log ultimakersystem-ccbdd300598d.5.2.11.20190503.boot0.log