gwarokk

Hello all...strange issue here. I have been happily humming along using 4.9.1 with no issues. I decided to upgrade to 4.11 and on my very first print with it, extrusion stops randomly. Not a clog, not a wiring problem....just stops...for the rest of the print. Tried a second time, same issue, different layer. The print continues just fine on all other axes, though. I reverted back to 4.9.1 and the print finished without incident. What could cause this? Is it because I imported my 4.9 profile into 4.11? It does not make sense to me that importing settings from a recent version would cause something like this, but that's the only theory I have at the moment. Any help would be greatly appreciated.

You can import/export to a shared directory as long as the OS can see it, I use a linux file server for storage with a samba share for this purpose. The only settings that seem to lack an import/export are the machine settings.

Here is the attached file as requested. CCR10_turret-bottom.3mf

Hello, I'm getting an odd defect in a model I'm trying to print, the shells you see in the picture are not supposed to look like this, they are supposed to be straight, as they are straight in other slicers I have loaded the model in. Since I prefer Cura, I'm curious to know what is causing this? This is using the unmodified "standard quality" profile. The result of this is the outer shell having wavy artifacts due to the way these shells are sliced. Is this just the way Cura is going to slice it? I've tried playing around with various options but nothing has helped.