Jump to content

iBenx_Neb

Dormant
  • Posts

    5
  • Joined

  • Last visited

Personal Information

  • 3D printer
    Ultimaker Original (+)

iBenx_Neb's Achievements

0

Reputation

  1. Hello, It was shipped with the wrong firmware. To fix this, I installed Cura 15.6.4 and updated it using the installer. It all worked fine from there. Weirdly, the newest version of cura still didn't recognize it. It's like it doesn't have the drivers? Anyway, I'll stick with using the old version or a different slicer. Which is the best that you recommend? Thanks for your help. Ben.
  2. Hi, Messed around with the UltiController and wires with still no good results. I don't see an invisible message however much I screw the potentiometer. Thanks
  3. Hi, I've hooked up the UltiController and I'm getting the blank screen like many others have got. The computer still doesn't recognize the printer so I can't update the firmware either. I've tried changing the COM port, no affect. If you could help that would be much appreciated! Thanks
  4. Hi, Thanks for responding. I do have the Ulticontroller, but the spacers weren't included so we're making some. When I connect the USB to the Pronterface, it just says 'Connecting' but never connects. When I get the ulticontroller built, I'll update you. Thanks.
  5. Hi, I recently got an UMO, and when I connect it via usb, it doesn't get recognized by cura. In Device Manager, it says the Genuino Mega 2560 (so it's working) and it confirms it in properties. I have arduino installed, and still can't figure out why it doesn't work. Thanks.
×
×
  • Create New...