mbr2_usr

Looks like updating from Cura 4.6 to 4.7 broke the configuration file. There is now a folder for each version with a CFG file that was automatically modified during the update. C:\Users\%USERNAME%\AppData\Roaming\cura\4.6\machine_instances C:\Users\%USERNAME%\AppData\Roaming\cura\4.7\machine_instances You will once again need to add this line to [metadata] machine_x3g_variant = r2 Here's my full config file, now located in the 4.7 directory: [general] version = 4 name = MakerBotReplicator #2 id = MakerBotReplicator #2 [metadata] group_id = 1f4b7576-099e-4475-95d1-5f4e867ad293 setting_version = 15 machine_x3g_variant = r2 type = machine [containers] 0 = MakerBotReplicator #2_user #2 1 = makerbotreplicator_current_profile 2 = empty_intent 3 = draft 4 = empty_material 5 = empty_variant 6 = MakerBotReplicator #2_settings #2 7 = makerbotreplicator EDIT: Hmm, still having an issue printing. Will try making changes to the old 4.6 file as well. If that doesn't work I'll re-install 4.6

Thank you for taking the time to write this tutorial! I've followed the steps and Cura will now slice my STL and spit out an X3G file, but I'm having a problem. When I start my print, the machine heats up and then starts along the printing path. The issue? It doesn't extrude any filament. It seems like the motor is not running... To troubleshoot I've use the "load filament" feature and printed other files sliced in the Makerbot software with no issues. Any idea of what could be happening? Thanks!