z-uo

Tanks to all, I use the solution with the search and replace and I put all configs file in this git repo. So at the end to add this printer to the new version of Cura I can follow this steps: Printer Settings: start from Ultimaker printer (because using the Custom FFF do not work) config and set as in original pdf Materials and Profiles: import from these configuration files. With this config it works well, also with TPU by adding a new Spool Holder findable in the repo.

Reading manually a working gcode with the generated, and I find every layer this: M106 S153 M204 P1000 M566 X600 Y600 In a correct gcode: .... ;LAYER:5 ;TYPE:WALL-INNER .... Into the gcode that go to the corner ;LAYER:5 M106 S255 M204 P1000 M566 X600 Y600 ;TYPE:WALL-INNER Does anyone know the meaning of these lines? I solved manually removing this other different line that was recurrent: M566 X1800 Y1800 Does someone know what settings generate it? I fixed it with a brutal find and replace. But I think that if this instruction are put for some other reason I cannot check it.

I create a new printer and it works but do not extrude nothing. The only other difference is the "Print Core" presence into material. How to have this parameter into another custom printer? (In my situation in one exist and in other does not, but the other do not come back to the corner, but it does not extrude)

In the attached file the video that show the problem. If I generete the gcode with standard "German REPRAP" config, it does not have this problem, but obviously the material do not be extruded for some other configurations. cura_problem.mp4.zip

@burtoogle in attachment there is a simple piramid gcode. @Mari with old version of Cura I cannot generate gcode because it crash. But I managed to save the .ini configuration file. UMS5_piramid.gcode

I do not think that is an error into start/end gcode, because they are only at the start and the end of the print. I say this also because the same gcode with Simplify3D does not have problems. The problem is that on each layer the estrusor go back to a corner. I think that is another settings. I try to change "Z seam Alignment" from "sharpest corner" to "user specified" but the problem does not solve. Exist other configurations that bring the extrusor at corner position for each layer?

The cura setup of this site is for cura 13.06.4 So I create the configuration with this version of cura and after I import it with the Cura 4.6.1, It print. But every layer move itself to a corner. This is time consuming useless movement. How to prevent it?

I do not have nothing inside 'Modify G-Code' like you can see into image. I also try to change "Z seam Alignment" but does not change nothing. I'm using Cura 4.6.1 and i set "G-code flavor" to "RepRap"

I have a Hamlet HP3DX100, this is my first 3D printer. I set cura for printing well but on each layer the extruder move to a corner and after start to print the next layer. This have the side effect to create some bad artifact from the end point to the corner for each layer. Exist some settings to solve this issue?