dstone_pco2

Well i was finally able to watch it as it moved to the one in the back and it looks like its a height issue and I'm going to need to stagger them to print properly the one of the axis was hitting the unit when it moved to the back print. That is also why the difference was always in the same line. and the exact way on each unit. Thanks for the help.

It is an S5 pro bundle with air manager and material station. I know when it does the auto leveling probe it goes over the whole plate. I can print the row in the back without an issue by itself "one at a time" but when I have a row in front it has issues with only the back row. The uniformity of the squish is what seems weird to me. I went to take a video of the leveling and it failed. I redid a manual calibration. I started a new run and here is the auto cal video it goes over the entire plate. Had to zip the mp4 file. 20210303_113951_1.zip

I'm currently trying to print out several ABS little rectangular prisms. I'm printing them with "one at a time" sequence selected. The back row always fails in a weird way and was wonder if anyone has ever experienced this and how to solve this issue. I have performed a manual bed level and I can print the objects in the same position by themselves without any problems here are some pictures to show the problem and good units (I flipped them upside down so you could see the bottom). It appears the first layer isn't getting a good squish but i don't know why or how it is so uniform. Edit: The axis was hitting the units in the back and casing issues with the print. due to the height of the units.