pa_trick
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by pa_trick
-
-
bedankt. I suspect the the issue is more related to how it is responding on a Linux platform (ubuntu 20.04). I have attached a screen grab of my Variant's directory and one of the definitions contained in it.... I guess I will not be attaching one of the CFG files because your site does not accept .CFG files.
here is the content of the artillery_base_0.4.inst.cfg. Tell if the file is correctly formed.
[general]
name = 0.4mm Nozzle
version = 4
definition = artillery_base[metadata]
setting_version = 13
type = variant
hardware_type = nozzle[values]
machine_nozzle_size = 0.4 -
-
I had my primary installation of Cura 4.6.1 start doing some very strange things. So I purged my computer of all cura hooks, directories, etc rebooted and installed 4.6.2 fresh with the profiles and such for my Sidewinder X1. I loaded my first .stl and could not do anything because there was no Nozzle size defined. Ok, so I checked the Print profile and there was nothing about nozzle there, the Extruder had the correct filament size and nozzle offset, but no nozzle size. Just in-case I checked out a couple material profiles and the Nozzle size was not hidden there.
Any suggestions where I can find the Nozzle size definition in 4.6.2? alstublieft en bedankt
Cura 4.6.2 - Where is the Nozzle settings?
in UltiMaker Cura
Posted
Yes, it is a full profile. I backed out 4.6.2 and reloaded the 4.6.1 AppImage and the profile appears to be working correctly there. At least I have nozzles and it is able to slice. I am continuing to check it out.
I have included a zip of the complete profile from my Win10 machine since it has the resources directory structure. It was created by Eric at https://3d-nexus.com/
SidewinderX1Cura 4.6.1 Profile.zip