HillbillyHydrographics

Thank you. That's a definite upgrade comming in the near future, along with an enclosure. Though it hasn't been a issue with running PETG, yet. But for what I do, ABS will work and costs a fraction of the price. So far I have no complaints. With the filament or the printer.

Hello all, Post 1. Thought I would start here since I just completed my first print tonight with what seems like abnormal ease. I can only attribute the success to either the printer or the filament but based on customer reviews I suspect it's the materials. So here's the run down Printer: AnyCubic Mega Zero, Fully stock, No heat bed, No Enclosure www.anycubic.com Filament: Atomic Filaments, USA, Crystal Clear/Natural PETG PRO, $32.99, 1kg Roll, Recomended Settings: Nozzle Temp - 232 to 245C, Bed Temp - 60 to 70C, File: OWL Total Print Time 4.5hr Actual Print Settings: Speed - 45mm, Nozzle Temp - 245C, Fan - 49% (125/255), Flow - 100 (defaut) The results were nearly perfection after the first 5 minutes. I had a user error on my part which is what caused some minor curling on the initial adhesion layer but after that it was flawless.