Digital101

Also, here's a WeTransfer link of the Tolerance.STL file that's saved as a project. I've cycled through the default Cura profiles with no luck. https://we.tl/t-VrOe1gBhZX

I've also used a different model from Thingiverse to see if the problem persisted, and it did. https://www.thingiverse.com/thing:4038181/files

I wasn't sure if you were wanting me to save the model as a project and send over the log file again, but here it is in case you need it. cura.log

I noticed the EngineErrorThread debug message here 2020-07-30 03:29:36,815 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket. 2020-07-30 03:29:37,059 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed. 2020-07-30 03:29:37,061 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:29:37,063 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process 2020-07-30 03:29:37,066 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:29:37,070 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening 2020-07-30 03:29:37,082 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe 2020-07-30 03:29:37,085 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2020-07-30 03:29:37,119 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,121 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2 2020-07-30 03:29:37,123 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker 2020-07-30 03:29:37,125 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,128 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify 2020-07-30 03:29:37,131 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected 2020-07-30 03:29:37,133 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49674 2020-07-30 03:29:37,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by 2020-07-30 03:29:37,137 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or 2020-07-30 03:29:37,139 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version. 2020-07-30 03:29:37,141 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,143 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful, 2020-07-30 03:29:37,145 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2020-07-30 03:29:37,147 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2020-07-30 03:29:37,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details. 2020-07-30 03:29:37,151 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,153 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License 2020-07-30 03:29:37,155 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>. ----------------------------------------------------------------------------------------------------------------------------------------- And the rest of the log file 2020-07-30 03:20:46,867 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger 2020-07-30 03:20:46,897 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker 2020-07-30 03:20:46,914 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater 2020-07-30 03:20:46,929 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader 2020-07-30 03:20:46,944 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter 2020-07-30 03:20:46,962 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader 2020-07-30 03:20:46,995 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader 2020-07-30 03:20:47,011 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter 2020-07-30 03:20:47,035 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader 2020-07-30 03:20:47,053 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader 2020-07-30 03:20:47,068 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider 2020-07-30 03:20:47,080 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice 2020-07-30 03:20:47,105 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction 2020-07-30 03:20:47,121 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker 2020-07-30 03:20:47,136 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage 2020-07-30 03:20:47,158 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool 2020-07-30 03:20:47,176 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin 2020-07-30 03:20:47,191 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage 2020-07-30 03:20:47,205 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage 2020-07-30 03:20:47,230 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice 2020-07-30 03:20:47,244 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger 2020-07-30 03:20:47,283 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView 2020-07-30 03:20:47,304 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin 2020-07-30 03:20:47,325 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView 2020-07-30 03:20:47,344 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser 2020-07-30 03:20:47,423 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:20:47,425 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:20:47,426 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:20:47,428 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:20:47,430 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:20:47,432 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:20:47,434 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:20:47,436 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:20:47,441 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox 2020-07-30 03:20:47,457 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool 2020-07-30 03:20:47,477 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool 2020-07-30 03:20:47,501 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool 2020-07-30 03:20:47,524 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool 2020-07-30 03:20:47,539 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool 2020-07-30 03:20:47,561 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool 2020-07-30 03:20:47,577 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader 2020-07-30 03:20:47,597 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader 2020-07-30 03:20:47,618 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter 2020-07-30 03:20:47,637 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions 2020-07-30 03:20:47,882 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting 2020-07-30 03:20:47,907 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura 2020-07-30 03:20:47,909 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker 2020-07-30 03:20:48,256 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting 2020-07-30 03:20:48,426 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22 2020-07-30 03:20:48,483 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24 2020-07-30 03:20:48,543 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26 2020-07-30 03:20:48,615 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27 2020-07-30 03:20:48,701 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30 2020-07-30 03:20:48,762 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31 2020-07-30 03:20:48,807 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33 2020-07-30 03:20:48,854 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34 2020-07-30 03:20:48,913 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35 2020-07-30 03:20:48,930 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40 2020-07-30 03:20:48,947 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41 2020-07-30 03:20:48,966 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42 2020-07-30 03:20:48,983 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43 2020-07-30 03:20:48,999 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44 2020-07-30 03:20:49,016 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45 2020-07-30 03:20:49,032 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46 2020-07-30 03:20:49,050 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462 2020-07-30 03:20:49,065 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView 2020-07-30 03:20:49,086 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader 2020-07-30 03:20:49,117 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile 2020-07-30 03:20:49,133 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView 2020-07-30 03:20:49,136 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 3.0347068309783936 seconds 2020-07-30 03:20:49,146 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade. 2020-07-30 03:20:49,150 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,152 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,155 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,173 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,175 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,178 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,180 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,182 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,184 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,187 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,189 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,191 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,194 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,196 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,198 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,200 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,203 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,208 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,209 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,213 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,215 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:20:49,217 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:20:49,222 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [226]: The preferences file cannot be found or it is corrupted, so we will use default values 2020-07-30 03:20:49,224 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [235]: The preferences file 'None' cannot be found, will use default values 2020-07-30 03:20:57,793 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 8.463564395904541 seconds 2020-07-30 03:20:57,912 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0 2020-07-30 03:20:57,915 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker 2020-07-30 03:20:57,918 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager 2020-07-30 03:20:57,921 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager 2020-07-30 03:20:58,166 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective. 2020-07-30 03:20:58,190 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json 2020-07-30 03:20:59,095 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light 2020-07-30 03:21:00,832 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view. 2020-07-30 03:21:00,843 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight 2020-07-30 03:21:00,852 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ 2020-07-30 03:21:00,864 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix 2020-07-30 03:21:00,871 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD 2020-07-30 03:21:00,876 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD 2020-07-30 03:21:00,881 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange 2020-07-30 03:21:00,886 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange 2020-07-30 03:21:00,892 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight 2020-07-30 03:21:00,897 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet 2020-07-30 03:21:00,904 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier 2020-07-30 03:21:00,911 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue 2020-07-30 03:21:00,918 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace 2020-07-30 03:21:00,926 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch 2020-07-30 03:21:00,931 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse 2020-07-30 03:21:00,936 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements 2020-07-30 03:21:01,244 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created. 2020-07-30 03:21:01,401 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:21:01,403 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:21:01,405 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:21:02,883 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:146: TypeError: Cannot read property 'extruderList' of null 2020-07-30 03:21:02,885 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double 2020-07-30 03:21:02,894 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage 2020-07-30 03:21:03,000 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:21:03,003 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:143: TypeError: Cannot read property 'hasRemoteConnection' of null 2020-07-30 03:21:03,031 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:47: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:21:03,033 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:118: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:21:03,035 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:21:03,037 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:21:03,039 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:247: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:21:03,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:308: TypeError: Cannot read property 'hasVariants' of null 2020-07-30 03:21:03,043 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:35: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:21:03,108 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView 2020-07-30 03:21:03,111 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view. 2020-07-30 03:21:03,123 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created. 2020-07-30 03:21:03,123 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml] 2020-07-30 03:21:03,156 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server. 2020-07-30 03:21:03,159 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from 2020-07-30 03:21:03,160 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2020-07-30 03:21:03,166 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 17.917574167251587 seconds 2020-07-30 03:21:03,171 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [d48203f9d6a040948a7d7682511b1ba2] started 2020-07-30 03:21:03,174 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:21:03,180 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:21:03,182 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [75]: No active GlobalStack, set quality profile model as empty. 2020-07-30 03:21:03,184 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:21:03,185 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [39]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty. 2020-07-30 03:21:13,158 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:25:04,139 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger 2020-07-30 03:25:04,150 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker 2020-07-30 03:25:04,158 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater 2020-07-30 03:25:04,165 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader 2020-07-30 03:25:04,172 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter 2020-07-30 03:25:04,179 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader 2020-07-30 03:25:04,194 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader 2020-07-30 03:25:04,201 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter 2020-07-30 03:25:04,213 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader 2020-07-30 03:25:04,220 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader 2020-07-30 03:25:04,228 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider 2020-07-30 03:25:04,237 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice 2020-07-30 03:25:04,245 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction 2020-07-30 03:25:04,252 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker 2020-07-30 03:25:04,260 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage 2020-07-30 03:25:04,268 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool 2020-07-30 03:25:04,277 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin 2020-07-30 03:25:04,284 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage 2020-07-30 03:25:04,291 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage 2020-07-30 03:25:04,301 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice 2020-07-30 03:25:04,308 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger 2020-07-30 03:25:04,327 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView 2020-07-30 03:25:04,338 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin 2020-07-30 03:25:04,348 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView 2020-07-30 03:25:04,357 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser 2020-07-30 03:25:04,391 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:25:04,393 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:25:04,395 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:25:04,398 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:25:04,400 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:25:04,402 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:25:04,404 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:25:04,406 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:25:04,413 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox 2020-07-30 03:25:04,423 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool 2020-07-30 03:25:04,432 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool 2020-07-30 03:25:04,444 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool 2020-07-30 03:25:04,457 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool 2020-07-30 03:25:04,465 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool 2020-07-30 03:25:04,476 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool 2020-07-30 03:25:04,485 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader 2020-07-30 03:25:04,497 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader 2020-07-30 03:25:04,506 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter 2020-07-30 03:25:04,515 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions 2020-07-30 03:25:04,617 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting 2020-07-30 03:25:04,625 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura 2020-07-30 03:25:04,628 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker 2020-07-30 03:25:04,975 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting 2020-07-30 03:25:05,149 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22 2020-07-30 03:25:05,205 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24 2020-07-30 03:25:05,260 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26 2020-07-30 03:25:05,320 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27 2020-07-30 03:25:05,382 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30 2020-07-30 03:25:05,442 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31 2020-07-30 03:25:05,504 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33 2020-07-30 03:25:05,546 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34 2020-07-30 03:25:05,610 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35 2020-07-30 03:25:05,635 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40 2020-07-30 03:25:05,647 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41 2020-07-30 03:25:05,657 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42 2020-07-30 03:25:05,666 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43 2020-07-30 03:25:05,675 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44 2020-07-30 03:25:05,682 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45 2020-07-30 03:25:05,689 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46 2020-07-30 03:25:05,696 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462 2020-07-30 03:25:05,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView 2020-07-30 03:25:05,715 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader 2020-07-30 03:25:05,730 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile 2020-07-30 03:25:05,738 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView 2020-07-30 03:25:05,740 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.132829427719116 seconds 2020-07-30 03:25:05,749 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade. 2020-07-30 03:25:05,755 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,757 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,761 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,764 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,767 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,769 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,773 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,777 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,781 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,785 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,792 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,796 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,799 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,801 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,804 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,806 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,809 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,812 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,815 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,817 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,820 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,823 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,826 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,828 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,831 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,833 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,837 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,840 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:05,843 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:25:05,845 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:25:15,156 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 9.20497989654541 seconds 2020-07-30 03:25:15,299 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0 2020-07-30 03:25:15,302 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker 2020-07-30 03:25:15,304 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager 2020-07-30 03:25:15,307 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager 2020-07-30 03:25:15,381 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective. 2020-07-30 03:25:15,403 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json 2020-07-30 03:25:15,626 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light 2020-07-30 03:25:16,654 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view. 2020-07-30 03:25:16,658 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight 2020-07-30 03:25:16,660 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ 2020-07-30 03:25:16,662 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix 2020-07-30 03:25:16,663 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD 2020-07-30 03:25:16,664 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD 2020-07-30 03:25:16,665 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange 2020-07-30 03:25:16,666 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange 2020-07-30 03:25:16,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight 2020-07-30 03:25:16,669 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet 2020-07-30 03:25:16,671 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier 2020-07-30 03:25:16,672 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue 2020-07-30 03:25:16,673 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace 2020-07-30 03:25:16,676 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch 2020-07-30 03:25:16,677 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse 2020-07-30 03:25:16,678 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements 2020-07-30 03:25:16,814 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created. 2020-07-30 03:25:16,904 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:25:16,907 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:25:16,911 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:25:18,166 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:146: TypeError: Cannot read property 'extruderList' of null 2020-07-30 03:25:18,169 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double 2020-07-30 03:25:18,177 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage 2020-07-30 03:25:18,239 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:25:18,243 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:143: TypeError: Cannot read property 'hasRemoteConnection' of null 2020-07-30 03:25:18,263 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:47: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:25:18,266 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:118: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:25:18,269 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:25:18,271 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:25:18,274 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:247: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:25:18,276 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:308: TypeError: Cannot read property 'hasVariants' of null 2020-07-30 03:25:18,278 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:35: TypeError: Cannot read property 'hasMaterials' of null 2020-07-30 03:25:18,312 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView 2020-07-30 03:25:18,313 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view. 2020-07-30 03:25:18,318 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created. 2020-07-30 03:25:18,319 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml] 2020-07-30 03:25:18,345 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server. 2020-07-30 03:25:18,349 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from 2020-07-30 03:25:18,351 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2020-07-30 03:25:18,357 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 15.337218284606934 seconds 2020-07-30 03:25:18,362 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [ecfab21fcb3940329106049244343bbf] started 2020-07-30 03:25:18,365 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:25:18,368 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:25:18,370 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [75]: No active GlobalStack, set quality profile model as empty. 2020-07-30 03:25:18,373 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:25:18,375 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [39]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty. 2020-07-30 03:25:18,719 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True 2020-07-30 03:25:18,735 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems. 2020-07-30 03:25:18,739 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324 2020-07-30 03:25:18,741 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel 2020-07-30 03:25:18,745 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630 2020-07-30 03:25:18,747 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0 2020-07-30 03:25:18,749 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:25:18,766 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]... 2020-07-30 03:25:18,780 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]... 2020-07-30 03:25:18,794 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:25:18,805 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]... 2020-07-30 03:25:18,825 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]... 2020-07-30 03:25:18,846 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:25:18,865 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]... 2020-07-30 03:25:18,880 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:25:18,895 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:25:18,908 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]... 2020-07-30 03:25:18,943 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]... 2020-07-30 03:25:18,980 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:25:19,636 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [ecfab21fcb3940329106049244343bbf] finished. 2020-07-30 03:25:19,638 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:25:22,637 - INFO - [MainThread] cura.CuraApplication.writeToLog [570]: User accepted the User-Agreement. 2020-07-30 03:25:32,644 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:25:35,435 - INFO - [MainThread] cura.Settings.MachineManager.addMachine [358]: Trying to add a machine with the definition id [creality_ender3] 2020-07-30 03:25:35,676 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [286]: The definition cache for definition creality_ender3 failed to pickle. 2020-07-30 03:25:36,088 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.37100768089294434 seconds. 2020-07-30 03:25:36,222 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0] 2020-07-30 03:25:36,224 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x000002B77C41E510> is deprecated (since 4.4): Please use extruderList instead. 2020-07-30 03:25:36,227 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3] 2020-07-30 03:25:36,457 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [286]: The definition cache for definition creality_base failed to pickle. 2020-07-30 03:25:36,504 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [creality_base_extruder_0 #2] has already been added to this stack [Creality Ender-3] 2020-07-30 03:25:36,506 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything 2020-07-30 03:25:36,508 - INFO - [MainThread] UM.Logger.info [122]: Initializing Active Machine... 2020-07-30 03:25:36,580 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:25:36,621 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:25:36,624 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:25:36,629 - INFO - [Thread-3] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2020-07-30 03:25:36,673 - DEBUG - [Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds 2020-07-30 03:25:36,674 - DEBUG - [Thread-3] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices 2020-07-30 03:25:37,014 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled. 2020-07-30 03:25:37,123 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:25:37,127 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:25:37,193 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check. 2020-07-30 03:25:37,257 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:25:37,267 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]... 2020-07-30 03:25:37,327 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:25:37,331 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:25:37,997 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s 2020-07-30 03:25:45,437 - INFO - [Thread-4] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2020-07-30 03:25:45,759 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.1296525001525879 seconds 2020-07-30 03:25:45,793 - DEBUG - [Thread-4] STLReader.STLReader._read [104]: Loaded a mesh with 4670010 vertices 2020-07-30 03:25:46,641 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:25:46,816 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 1.0129852294921875 seconds. 6444 input vertices. 6444 output vertices. 2020-07-30 03:25:47,403 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 2.0 seconds 2020-07-30 03:25:48,384 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.9778611660003662 seconds. 6443 input vertices. 6443 output vertices. 2020-07-30 03:25:48,409 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000002B70DCB3048>, took 0ms 2020-07-30 03:25:48,813 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]... 2020-07-30 03:25:50,420 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice... 2020-07-30 03:25:50,420 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]! 2020-07-30 03:25:50,426 - WARNING - [Thread-5] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x000002B77C41E510> is deprecated (since 4.4): Please use extruderList instead. 2020-07-30 03:25:50,835 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [444]: Sending slice message took 0.414142370223999 seconds 2020-07-30 03:25:52,711 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has disconnected faces! 2020-07-30 03:25:52,714 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has overlapping faces! 2020-07-30 03:25:53,662 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] -s support_pattern="zigzag" -s travel_compensate_overlapping_walls_enabled="True" -s wireframe_printspeed_bottom="5" -s prime_tower_enable="False" -s retraction_hop_only_when_collides="False" -s flow_rate_max_extrusion_offset="0" -s speed_slowdown_layers="2" -s connect_infill_polygons="False" -s support_line_width="0.4" -s machine_name="Creality Ender-3" -s jerk_travel_layer_0="8" -s wireframe_straight_before_down="20" -s speed_wall_x="25.0" -s speed_equalize_flow_enabled="False" -s skirt_brim_speed="20.0" -s support_tree_collision_resolution="0.2" -s prime_tower_flow="100" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_support="500" -s speed_travel="150.0" -s z_seam_y="235" -s machine_buildplate_type="glass" -s jerk_layer_0="8" -s wall_min_flow="0" -s material_guid="" -s machine_height="250" -s slicing_tolerance="middle" -s machine_heated_build_volume="False" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.0" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_wall_x="500" -s small_feature_speed_factor_0="50" -s retraction_min_travel="1.5" -s jerk_ironing="8" -s bridge_skin_density="100" -s draft_shield_height="10" -s cross_support_density_image="" -s switch_extruder_retraction_amount="16" -s mold_roof_height="0.5" -s acceleration_support_interface="500" -s material_crystallinity="False" -s raft_base_fan_speed="0" -s switch_extruder_retraction_speeds="20" -s machine_disallowed_areas="[[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]], [[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]]" -s line_width="0.4" -s machine_steps_per_mm_x="50" -s small_feature_speed_factor="50" -s machine_settings="0" -s ironing_pattern="zigzag" -s support_bottom_line_width="0.4" -s infill_material_flow="100" -s bridge_skin_material_flow_3="110" -s raft_surface_line_width="0.4" -s cross_infill_density_image="" -s support_roof_enable="True" -s jerk_support="8" -s raft_interface_thickness="0.30000000000000004" -s retraction_retract_speed="25" -s support_enable="False" -s spaghetti_infill_enabled="False" -s switch_extruder_extra_prime_amount="0" -s machine_steps_per_mm_z="50" -s small_hole_max_size="0" -s support_roof_height="0.8" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s raft_jerk="8" -s top_layers="4" -s brim_width="8.0" -s acceleration_travel="500" -s wall_line_width="0.4" -s travel_compensate_overlapping_walls_x_enabled="True" -s sub_div_rad_add="0.4" -s travel_avoid_other_parts="True" -s acceleration_travel_layer_0="500" -s machine_width="235" -s wireframe_enabled="False" -s material_diameter="1.75" -s support_offset="0" -s bridge_skin_support_threshold="50" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s bridge_fan_speed_2="0" -s support_tower_maximum_supported_diameter="3.0" -s filter_out_tiny_gaps="False" -s raft_interface_acceleration="500" -s cool_lift_head="False" -s material_print_temperature_layer_0="210" -s travel_avoid_distance="0.625" -s draft_shield_height_limitation="full" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s prime_blob_enable="False" -s wall_overhang_angle="90" -s wireframe_fall_down="0.5" -s bottom_thickness="0.8" -s support_tower_roof_angle="65" -s bridge_settings_enabled="False" -s mesh_position_x="0" -s ironing_only_highest_layer="False" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s blackmagic="0" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s bridge_wall_speed="12.5" -s acceleration_infill="500" -s material_flush_purge_speed="0.5" -s travel_speed="150.0" -s mold_angle="40" -s support_interface_height="0.8" -s jerk_wall_x="8" -s wireframe_roof_fall_down="2" -s raft_surface_speed="25.0" -s wall_line_count="2" -s raft_base_line_width="0.8" -s xy_offset="0" -s acceleration_support_roof="500" -s gradual_infill_steps="0" -s raft_base_jerk="8" -s center_object="False" -s machine_depth="235" -s alternate_carve_order="True" -s support_angle="45" -s machine_max_jerk_e="5" -s material_flow_layer_0="100" -s alternate_extra_perimeter="False" -s bridge_wall_min_length="5" -s ironing_enabled="False" -s support_interface_offset="0.0" -s default_material_bed_temperature="50" -s support_roof_density="33.333" -s material_standby_temperature="150" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_prepend="True" -s machine_max_jerk_xy="10" -s wireframe_roof_outer_delay="0.2" -s material_adhesion_tendency="10" -s z_seam_x="117.5" -s jerk_topbottom="8" -s wipe_hop_speed="5" -s support_wall_count="1" -s wireframe_roof_drag_along="0.8" -s jerk_support_roof="8" -s top_thickness="0.8" -s infill_overlap_mm="0.12" -s support_extruder_nr="0" -s support_fan_enable="False" -s infill_sparse_thickness="0.2" -s layer_start_x="0.0" -s support_top_distance="0.2" -s smooth_spiralized_contours="True" -s support_brim_enable="True" -s support_extruder_nr_layer_0="0" -s skin_overlap="10.0" -s acceleration_layer_0="500" -s wireframe_bottom_delay="0" -s material_anti_ooze_retraction_speed="5" -s material_end_of_filament_purge_speed="0.5" -s machine_max_feedrate_e="50" -s top_bottom_pattern_0="lines" -s infill_angles="[ ]" -s time="03:25:50" -s wall_0_extruder_nr="-1" -s initial_extruder_nr="0" -s jerk_travel="8" -s acceleration_support_infill="500" -s bridge_skin_density_3="80" -s wipe_retraction_extra_prime_amount="0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s skirt_brim_line_width="0.4" -s machine_nozzle_head_distance="3" -s machine_show_variants="False" -s speed_support_bottom="25.0" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s minimum_roof_area="10" -s wireframe_nozzle_clearance="1" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s speed_ironing="16.666666666666668" -s material_no_load_move_factor="0.940860215" -s spaghetti_max_height="2.0" -s initial_layer_line_width_factor="100.0" -s wireframe_top_delay="0" -s day="Thu" -s roofing_pattern="lines" -s print_bed_temperature="50" -s speed_equalize_flow_max="150" -s support_infill_extruder_nr="0" -s ironing_flow="10.0" -s support_roof_extruder_nr="0" -s support_initial_layer_line_distance="2.0" -s support_conical_angle="30" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s acceleration_topbottom="500" -s skin_outline_count="1" -s magic_spiralize="False" -s support_bottom_stair_step_height="0.3" -s bridge_enable_more_layers="True" -s material_break_temperature="50" -s draft_shield_enabled="False" -s adaptive_layer_height_enabled="False" -s material_initial_print_temperature="210" -s prime_tower_min_volume="6" -s optimize_wall_printing_order="True" -s support_roof_line_width="0.4" -s machine_max_feedrate_z="10" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_acceleration="500" -s speed_z_hop="5" -s raft_surface_jerk="8" -s support_infill_rate="20" -s acceleration_ironing="500" -s speed_infill="50.0" -s material_bed_temperature="50" -s wireframe_printspeed_down="5" -s support_type="everywhere" -s travel_retract_before_outer_wall="True" -s wall_0_wipe_dist="0.0" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s material_bed_temp_prepend="True" -s retraction_combing_max_distance="30" -s hole_xy_offset="0" -s machine_nozzle_temp_enabled="True" -s skirt_line_count="3" -s cool_fan_speed_0="0" -s wireframe_printspeed_flat="5" -s jerk_print="8" -s acceleration_support_bottom="500" -s command_line_settings="0" -s bridge_fan_speed="100" -s ooze_shield_enabled="False" -s machine_center_is_zero="False" -s material_surface_energy="100" -s raft_base_speed="18.75" -s resolution="0" -s prime_tower_position_y="203.6" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s wall_extruder_nr="-1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s raft_acceleration="500" -s support_interface_density="33.333" -s machine_start_gcode="; Ender 3 Custom Start G-code 2020-07-30 03:25:53,664 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder 2020-07-30 03:25:53,666 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G28 ; Home all axes 2020-07-30 03:25:53,668 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2020-07-30 03:25:53,670 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position 2020-07-30 03:25:53,672 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line 2020-07-30 03:25:53,674 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little 2020-07-30 03:25:53,676 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line 2020-07-30 03:25:53,678 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder 2020-07-30 03:25:53,680 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2020-07-30 03:25:53,682 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" -s machine_max_acceleration_e="5000" -s jerk_print_layer_0="8" -s support_bottom_material_flow="100" -s wipe_retraction_speed="25" -s extruder_prime_pos_x="0" -s meshfix_union_all="True" -s machine_extruder_count="1" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="210" -s flow_rate_extrusion_offset_factor="100" -s adaptive_layer_height_variation="0.04" -s minimum_polygon_circumference="1.0" -s skin_no_small_gaps_heuristic="False" -s speed_support_infill="25.0" -s support_skip_zag_per_mm="20" -s infill_offset_y="0" -s support_join_distance="2.0" -s spaghetti_inset="0.2" -s magic_fuzzy_skin_point_dist="0.8" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s cool_min_speed="10" -s infill_mesh_order="0" -s infill_support_angle="40" -s machine_firmware_retract="False" -s raft_surface_thickness="0.2" -s prime_tower_position_x="223.6" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s wireframe_drag_along="0.6" -s wireframe_strategy="compensate" -s speed_topbottom="25.0" -s raft_margin="15" -s infill_mesh="False" -s infill_line_distance="6.0" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s bridge_skin_speed_2="12.5" -s acceleration_wall_0="500" -s switch_extruder_prime_speed="20" -s material_flush_purge_length="60" -s wireframe_flow_connection="100" -s top_bottom_thickness="0.8" -s wireframe_top_jump="0.6" -s support_tower_diameter="3.0" -s retraction_hop_enabled="False" -s acceleration_roofing="500" -s wipe_pause="0" -s adaptive_layer_height_variation_step="0.04" -s wipe_repeat_count="5" -s support_skip_some_zags="False" -s bridge_fan_speed_3="0" -s speed_wall_0="25.0" -s meshfix="0" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s support_bottom_offset="0.0" -s speed_wall="25.0" -s coasting_speed="90" -s roofing_layer_count="0" -s material_bed_temperature_layer_0="50" -s retraction_count_max="100" -s extruder_prime_pos_abs="False" -s ooze_shield_angle="60" -s cool_fan_full_at_height="0.6000000000000001" -s initial_bottom_layers="4" -s support_zag_skip_count="10" -s skirt_gap="10.0" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_weighted" -s machine_steps_per_mm_e="1600" -s retraction_combing="noskin" -s skirt_brim_material_flow="100" -s machine_extruders_share_heater="False" -s cooling="0" -s wall_thickness="0.8" -s support_bottom_height="0.8" -s material_print_temp_wait="True" -s acceleration_enabled="False" -s retraction_prime_speed="25" -s z_seam_type="back" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s machine_shape="rectangular" -s prime_tower_size="20" -s speed_support_interface="25.0" -s wall_0_inset="0" -s speed="0" -s z_seam_position="back" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -s infill_pattern="cubic" -s minimum_interface_area="10" -s infill_before_walls="False" -s zig_zaggify_infill="False" -s travel_avoid_supports="True" -s shell="0" -s spaghetti_infill_extra_volume="0" -s support_interface_extruder_nr="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s roofing_material_flow="100" -s wireframe_up_half_speed="0.3" -s cool_fan_enabled="True" -s support_xy_distance="0.8" -s infill_extruder_nr="-1" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s cool_min_layer_time="10" -s machine_max_feedrate_x="500" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_extrusion_cool_down_speed="0.7" -s top_bottom_pattern="lines" -s material_maximum_park_duration="300" -s infill_support_enabled="False" -s travel="0" -s max_extrusion_before_wipe="10" -s ooze_shield_dist="2" -s wireframe_height="3" -s support_interface_enable="True" -s support_brim_width="4" -s jerk_support_bottom="8" -s conical_overhang_enabled="False" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="0.2" -s machine_end_gcode="G91 ;Relative positioning 2020-07-30 03:25:53,684 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 F2700 ;Retract a bit 2020-07-30 03:25:53,686 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 Z0.2 F2400 ;Retract and raise Z 2020-07-30 03:25:53,688 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y5 F3000 ;Wipe out 2020-07-30 03:25:53,690 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z10 ;Raise Z more 2020-07-30 03:25:53,692 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G90 ;Absolute positionning 2020-07-30 03:25:53,694 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:53,696 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0 Y235 ;Present print 2020-07-30 03:25:53,698 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M106 S0 ;Turn-off fan 2020-07-30 03:25:53,700 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M104 S0 ;Turn-off hotend 2020-07-30 03:25:53,702 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M140 S0 ;Turn-off bed 2020-07-30 03:25:53,704 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:53,706 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M84 X Y E ;Disable all steppers but Z 2020-07-30 03:25:53,709 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] " -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s fill_perimeter_gaps="everywhere" -s carve_multiple_volumes="False" -s retraction_amount="6.5" -s skin_preshrink="0.8" -s ironing_inset="0.2" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s layer_start_y="0.0" -s material_flow_dependent_temperature="False" -s support_material_flow="100" -s wipe_retraction_prime_speed="25" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s minimum_support_area="2" -s jerk_skirt_brim="8" -s roofing_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s support_interface_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s support_bottom_density="33.333" -s wall_material_flow="100" -s support_interface_pattern="grid" -s raft_fan_speed="0" -s remove_empty_first_layers="True" -s bottom_layers="4" -s prime_tower_brim_enable="False" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s outer_inset_first="False" -s speed_travel_layer_0="100.0" -s support_bottom_extruder_nr="0" -s extruder_prime_pos_z="0" -s machine_nozzle_expansion_angle="45" -s support_conical_enabled="False" -s cool_fan_speed_min="100.0" -s support_tree_branch_distance="1" -s jerk_infill="8" -s wall_min_flow_retract="False" -s machine_nozzle_size="0.4" -s support_tree_branch_diameter_angle="5" -s nozzle_disallowed_areas="[]" -s meshfix_maximum_resolution="0.05" -s speed_roofing="25.0" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s support_roof_line_distance="2.4000240002400024" -s brim_outside_only="True" -s min_infill_area="0" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s draft_shield_dist="10" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s support_roof_offset="0.0" -s retraction_extra_prime_amount="0" -s acceleration_print="500" -s machine_max_acceleration_z="100" -s fill_outline_gaps="False" -s raft_interface_fan_speed="0" -s coasting_volume="0.064" -s wall_x_extruder_nr="-1" -s experimental="0" -s gantry_height="25" -s support_interface_skip_height="0.2" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s wireframe_printspeed_up="5" -s wipe_hop_amount="0.2" -s extruder_prime_pos_y="0" -s extruders_enabled_count="1" -s mesh_position_y="0" -s support_tree_angle="40" -s material_final_print_temperature="210" -s machine_max_acceleration_y="500" -s adhesion_type="skirt" -s roofing_line_width="0.4" -s wireframe_flow_flat="100" -s bridge_wall_material_flow="50" -s material_print_temperature="210" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s machine_nozzle_tip_outer_diameter="1" -s max_skin_angle_for_expansion="90" -s wipe_retraction_amount="6.5" -s default_material_print_temperature="210" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s brim_gap="0" -s cutting_mesh="False" -s wireframe_printspeed="5" -s platform_adhesion="0" -s wall_line_width_x="0.4" -s magic_fuzzy_skin_thickness="0.3" -s magic_fuzzy_skin_enabled="False" -s wireframe_flat_delay="0.1" -s gradual_support_infill_steps="0" -s layer_0_z_overlap="0.15" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s speed_layer_0="20.0" -s support_mesh_drop_down="True" -s machine_max_feedrate_y="500" -s build_volume_temperature="28" -s bottom_skin_expand_distance="0.8" -s switch_extruder_retraction_speed="20" -s wipe_retraction_retract_speed="25" -s z_seam_relative="False" -s layer_height_0="0.2" -s support_roof_angles="[ ]" -s material_anti_ooze_retracted_position="-4" -s top_skin_preshrink="0.8" -s support_interface_material_flow="100" -s cool_fan_speed="100.0" -s machine_steps_per_mm_y="50" -s machine_minimum_feedrate="0.0" -s support_bottom_line_distance="2.4000240002400024" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="500" -s raft_smoothing="5" -s material_break_speed="25" -s material_break_preparation_retracted_position="-16" -s support="0" -s skin_edge_support_layers="0" -s raft_interface_jerk="8" -s infill_wall_line_count="0" -s relative_extrusion="False" -s adhesion_extruder_nr="0" -s raft_base_line_spacing="1.6" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s bottom_skin_preshrink="0.8" -s machine_nozzle_id="unknown" -s support_bottom_pattern="grid" -s travel_compensate_overlapping_walls_0_enabled="False" -s support_mesh="False" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s jerk_prime_tower="8" -s adaptive_layer_height_threshold="0.2" -s raft_speed="25.0" -s support_roof_pattern="grid" -s magic_fuzzy_skin_outside_only="False" -s magic_fuzzy_skin_point_density="1.25" -s machine_heated_bed="True" -s support_bottom_stair_step_width="5.0" -s material_flow="100" -s retraction_extrusion_window="10" -s support_conical_min_width="5.0" -s gradual_infill_step_height="1.5" -s material_bed_temp_wait="True" -s support_bottom_angles="[ ]" -s infill="0" -s raft_interface_line_spacing="1.0" -s raft_surface_acceleration="500" -s bridge_skin_speed="12.5" -s wipe_brush_pos_x="100" -s jerk_roofing="8" -s wireframe_flow="100" -s material_break_preparation_speed="2" -s speed_print="50.0" -s brim_replaces_support="False" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="25" -s anti_overhang_mesh="False" -s top_bottom_extruder_nr="-1" -s prime_tower_line_width="0.4" -s infill_multiplier="1" -s raft_surface_layers="2" -s machine_max_acceleration_x="500" -s infill_offset_x="0" -s jerk_wall="8" -s raft_surface_fan_speed="0" -s mold_enabled="False" -s date="30-07-2020" -s machine_heat_zone_length="16" -s support_tree_enable="False" -s skin_overlap_mm="0.04" -s support_use_towers="False" -s jerk_support_infill="8" -s small_feature_max_length="0.0" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s brim_line_count="20" -s skin_edge_support_thickness="0" -s support_brim_line_count="10" -s connect_skin_polygons="False" -s support_z_distance="0.2" -s retract_at_layer_change="False" -s skin_material_flow="100" -s wireframe_roof_inset="3" -s support_xy_distance_overhang="0.4" -s print_sequence="all_at_once" -s bridge_skin_speed_3="12.5" -s jerk_wall_0="8" -s machine_endstop_positive_direction_x="False" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop="0.2" -s dual="0" -s jerk_enabled="False" -s layer_height="0.2" -s bridge_sparse_infill_max_density="0" -s print_temperature="210" -e0 -s support_pattern="zigzag" -s travel_compensate_overlapping_walls_enabled="True" -s speed_travel_layer_0="100.0" -s retraction_hop_only_when_collides="False" -s raft_interface_fan_speed="0" -s acceleration_travel_layer_0="500" -s connect_infill_polygons="False" -s support_line_width="0.4" -s bridge_fan_speed="100" -s jerk_travel_layer_0="8" -s speed_wall_x="25.0" -s speed_equalize_flow_enabled="False" -s extruder_prime_pos_z="0" -s machine_extruder_start_pos_x="0" -s skirt_brim_speed="20.0" -s alternate_extra_perimeter="False" -s support_tree_collision_resolution="0.2" -s prime_tower_flow="100" -s machine_nozzle_cool_down_speed="2.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s acceleration_support="500" -s speed_travel="150.0" -s speed_equalize_flow_max="150" -s machine_extruder_start_code="" -s z_seam_y="235" -s jerk_layer_0="8" -s wall_min_flow="0" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s slicing_tolerance="middle" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.0" -s raft_base_fan_speed="0" -s switch_extruder_retraction_speeds="20" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_wall_x="500" -s small_feature_speed_factor_0="50" -s retraction_min_travel="1.5" -s jerk_ironing="8" -s bridge_sparse_infill_max_density="0" -s bridge_skin_density="100" -s cross_support_density_image="" -s switch_extruder_retraction_amount="16" -s mold_roof_height="0.5" -s acceleration_support_interface="500" -s material_crystallinity="False" -s line_width="0.4" -s machine_steps_per_mm_x="50" -s small_feature_speed_factor="50" -s machine_settings="0" -s ironing_pattern="zigzag" -s acceleration_print="500" -s support_bottom_line_width="0.4" -s infill_material_flow="100" -s bridge_skin_material_flow_3="110" -s raft_surface_line_width="0.4" -s cross_infill_density_image="" -s support_roof_enable="True" -s jerk_support="8" -s raft_interface_thickness="0.30000000000000004" -s retraction_retract_speed="45" -s spaghetti_infill_enabled="False" -s switch_extruder_extra_prime_amount="0" -s machine_steps_per_mm_z="50" -s small_hole_max_size="0" -s support_roof_height="0.8" -s support_bottom_height="0.8" -s material_flush_purge_speed="0.5" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s resolution="0" -s extruder_nr="0" -s raft_jerk="8" -s top_layers="4" -s brim_width="8.0" -s machine_extruder_end_pos_x="0" -s acceleration_travel="500" -s wall_line_width="0.4" -s travel_compensate_overlapping_walls_x_enabled="True" -s sub_div_rad_add="0.4" -s travel_avoid_other_parts="True" -s material_diameter="1.75" -s support_offset="0" -s bridge_skin_support_threshold="50" -s extruder_prime_pos_y="0" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s bridge_fan_speed_2="0" -s support_tower_maximum_supported_diameter="3.0" -s support_xy_distance_overhang="0.4" -s filter_out_tiny_gaps="False" -s raft_interface_acceleration="500" -s cool_lift_head="False" -s material_print_temperature_layer_0="200" -s travel_avoid_distance="0.625" -s gradual_support_infill_steps="0" -s brim_gap="0" -s blackmagic="0" -s wipe_retraction_amount="5" -s bridge_wall_material_flow="50" -s support_tree_angle="40" -s material_final_print_temperature="200" -s mesh_position_y="0" -s support_conical_enabled="False" -s cool_fan_speed_min="100" -s support_tree_branch_distance="1" -s support_roof_density="33.333" -s material_standby_temperature="180" -s material_flow_layer_0="100" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s skin_no_small_gaps_heuristic="False" -s experimental="0" -s travel_compensate_overlapping_walls_0_enabled="False" -s fill_outline_gaps="False" -s retraction_extra_prime_amount="0" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s acceleration_support_infill="500" -s bridge_skin_density_3="80" -s wipe_retraction_extra_prime_amount="0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s raft_surface_thickness="0.2" -s cool_fan_speed_0="0" -s skirt_brim_line_width="0.4" -s machine_nozzle_head_distance="3" -s speed_support_bottom="25.0" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s minimum_roof_area="10" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s top_bottom_thickness="0.8" -s speed_ironing="16.666666666666668" -s material_no_load_move_factor="0.940860215" -s spaghetti_max_height="2.0" -s initial_layer_line_width_factor="100.0" -s raft_margin="15" -s acceleration_wall="500" -s support_bottom_distance="0.2" -s roofing_pattern="lines" -s material_extrusion_cool_down_speed="0.7" -s ironing_flow="10.0" -s support_initial_layer_line_distance="2.0" -s min_skin_width_for_expansion="4.898587196589413e-17" -s support_conical_angle="30" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s acceleration_topbottom="500" -s skin_outline_count="1" -s wall_line_count="2" -s support_bottom_stair_step_height="0.3" -s bridge_enable_more_layers="True" -s material_break_temperature="50" -s material_initial_print_temperature="200" -s prime_tower_min_volume="6" -s magic_fuzzy_skin_enabled="False" -s z_seam_x="117.5" -s optimize_wall_printing_order="True" -s support_roof_line_width="0.4" -s support_skip_zag_per_mm="20" -s speed_support_infill="25.0" -s bottom_layers="4" -s meshfix="0" -s speed_wall_0="25.0" -s speed_z_hop="5" -s raft_surface_jerk="8" -s support_infill_rate="20" -s acceleration_ironing="500" -s speed_infill="50.0" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s retraction_combing_max_distance="30" -s hole_xy_offset="0" -s machine_steps_per_mm_e="1600" -s switch_extruder_prime_speed="20" -s acceleration_wall_0="500" -s machine_extruder_end_pos_abs="False" -s jerk_infill="8" -s wall_min_flow_retract="False" -s mold_angle="40" -s magic_fuzzy_skin_thickness="0.3" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s infill_line_distance="6.0" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s bridge_skin_speed_2="12.5" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s travel_avoid_supports="True" -s shell="0" -s roofing_material_flow="100" -s mesh_position_x="0" -s ironing_only_highest_layer="False" -s platform_adhesion="0" -s wall_line_width_x="0.4" -s support_tree_branch_diameter_angle="5" -s support_interface_offset="0.0" -s spaghetti_inset="0.2" -s infill_support_enabled="False" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s support_tower_diameter="3.0" -s retraction_hop_enabled="False" -s acceleration_roofing="500" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s wipe_pause="0" -s retraction_count_max="100" -s skin_material_flow="100" -s cool_fan_full_at_height="0.6000000000000001" -s initial_bottom_layers="4" -s extruder_prime_pos_abs="False" -s support_bottom_offset="0.0" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s cool_min_layer_time="10" -s wipe_repeat_count="5" -s support_skip_some_zags="False" -s bridge_fan_speed_3="0" -s material_print_temperature="200" -s speed_support_roof="25.0" -s conical_overhang_angle="50" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_weighted" -s jerk_print_layer_0="8" -s support_bottom_material_flow="100" -s speed="0" -s z_seam_position="back" -s default_material_print_temperature="200" -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s speed_topbottom="25.0" -s wall_thickness="0.8" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s layer_start_y="0.0" -s material_flow_dependent_temperature="False" -s support_material_flow="100" -s wipe_retraction_prime_speed="45" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -s infill_pattern="cubic" -s minimum_interface_area="10" -s infill_before_walls="False" -s zig_zaggify_infill="False" -s retraction_prime_speed="45" -s z_seam_type="back" -s machine_extruder_start_pos_y="0" -s bridge_skin_speed_3="12.5" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s skin_preshrink="0.8" -s ironing_inset="0.2" -s fill_perimeter_gaps="everywhere" -s retraction_amount="5" -s cooling="0" -s travel="0" -s max_extrusion_before_wipe="10" -s speed_wall="25.0" -s coasting_speed="90" -s bottom_thickness="0.8" -s roofing_layer_count="0" -s machine_extruder_cooling_fan_number="0" -s jerk_travel="8" -s coasting_volume="0.064" -s wipe_hop_speed="5" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s minimum_support_area="2" -s coasting_min_volume="0.8" -s magic_mesh_surface_mode="normal" -s jerk_skirt_brim="8" -s cool_fan_speed_max="100" -s support_interface_angles="[ ]" -s wall_material_flow="100" -s support_interface_pattern="grid" -s raft_fan_speed="0" -s acceleration_infill="500" -s outer_inset_first="False" -s machine_nozzle_size="0.4" -s top_bottom_pattern_0="lines" -s infill_angles="[ ]" -s speed_roofing="25.0" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s support_roof_line_distance="2.4000240002400024" -s brim_outside_only="True" -s infill_offset_y="0" -s support_join_distance="2.0" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s jerk_support_roof="8" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="200" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s wall_overhang_angle="90" -s support_interface_skip_height="0.2" -s material_surface_energy="100" -s raft_base_speed="18.75" -s cool_fan_speed="100" -s machine_steps_per_mm_y="50" -s speed_layer_0="20.0" -s top_skin_expand_distance="0.8" -s infill_randomize_start_location="False" -s layer_0_z_overlap="0.15" -s wipe_retraction_speed="45" -s meshfix_union_all="True" -s extruder_prime_pos_x="0" -s cool_fan_enabled="True" -s support_xy_distance="0.8" -s min_infill_area="0" -s support_brim_enable="True" -s layer_start_x="0.0" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="0.2" -s jerk_support_bottom="8" -s conical_overhang_enabled="False" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s machine_nozzle_temp_enabled="True" -s skirt_line_count="3" -s wipe_retraction_retract_speed="45" -s z_seam_relative="False" -s support_roof_angles="[ ]" -s material_anti_ooze_retracted_position="-4" -s top_skin_preshrink="0.8" -s support_interface_material_flow="100" -s support_bottom_line_distance="2.4000240002400024" -s multiple_mesh_overlap="0.15" -s acceleration_prime_tower="500" -s raft_smoothing="5" -s material_break_speed="25" -s material_break_preparation_retracted_position="-16" -s support="0" -s skin_edge_support_layers="0" -s raft_interface_jerk="8" -s infill_wall_line_count="0" -s raft_base_line_spacing="1.6" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s bottom_skin_preshrink="0.8" -s machine_nozzle_id="unknown" -s support_bottom_pattern="grid" -s wall_0_wipe_dist="0.0" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_extruder_end_pos_y="0" -s jerk_prime_tower="8" -s raft_speed="25.0" -s support_roof_pattern="grid" -s machine_extruder_end_code="" -s machine_extruder_start_pos_abs="False" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_stair_step_width="5.0" -s meshfix_maximum_resolution="0.05" -s skirt_brim_material_flow="100" -s support_bottom_angles="[ ]" -s raft_base_line_width="0.8" -s infill="0" -s raft_interface_line_spacing="1.0" -s wipe_brush_pos_x="100" -s raft_surface_acceleration="500" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s material_break_preparation_speed="2" -s skin_overlap="10.0" -s acceleration_layer_0="500" -s speed_print="50.0" -s brim_replaces_support="False" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="45" -s prime_tower_line_width="0.4" -s xy_offset="0" -s support_zag_skip_count="10" -s skirt_gap="10.0" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s ironing_enabled="False" -s infill_multiplier="1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_nozzle_offset_x="0" -s raft_acceleration="500" -s support_interface_density="33.333" -s support_conical_min_width="5.0" -s gradual_infill_step_height="1.5" -s raft_surface_layers="2" -s infill_offset_x="0" -s jerk_wall="8" -s raft_surface_fan_speed="0" -s mold_enabled="False" -s machine_heat_zone_length="16" -s skin_overlap_mm="0.04" -s support_use_towers="False" -s jerk_support_infill="8" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s small_feature_max_length="0.0" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s brim_line_count="20" -s skin_edge_support_thickness="0" -s wipe_hop_amount="0.2" -s support_brim_line_count="10" -s retract_at_layer_change="False" -s jerk_wall_0="8" -s support_interface_height="0.8" -s retraction_hop="0.2" -s dual="0" -s support_bottom_density="33.333" -s machine_feeder_wheel_diameter="10.0" -s support_brim_width="4" -s support_interface_enable="True" -s switch_extruder_retraction_speed="20" -s bottom_skin_expand_distance="0.8" -s infill_support_angle="40" -s machine_endstop_positive_direction_x="False" -s material_end_of_filament_purge_speed="0.5" -s machine_nozzle_offset_y="0" -s material_flush_purge_length="60" -s raft_base_jerk="8" -s material_anti_ooze_retraction_speed="5" -s support_z_distance="0.2" -s connect_skin_polygons="False" -s roofing_line_width="0.4" -s support_top_distance="0.2" -s infill_overlap_mm="0.12" -s top_thickness="0.8" -s magic_fuzzy_skin_outside_only="False" -s support_wall_count="1" -s jerk_topbottom="8" -s wall_0_inset="0" -s speed_support_interface="25.0" -s jerk_print="8" -s command_line_settings="0" -s acceleration_support_bottom="500" -s support_angle="45" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50.0" -s center_object="False" -s gradual_infill_steps="0" -s acceleration_support_roof="500" -s retraction_extrusion_window="10" -s material_flow="100" -s raft_surface_speed="25.0" -s jerk_wall_x="8" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s bridge_wall_speed="12.5" -s support_tower_roof_angle="65" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -g -e0 -l "0" -s extruder_nr="0" 2020-07-30 03:25:55,350 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket. 2020-07-30 03:25:55,572 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed. 2020-07-30 03:25:55,574 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:25:55,575 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process 2020-07-30 03:25:55,578 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:25:55,582 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening 2020-07-30 03:25:55,587 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe 2020-07-30 03:25:55,590 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49675', ''] 2020-07-30 03:25:55,623 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:55,626 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected 2020-07-30 03:25:55,628 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49675 2020-07-30 03:25:55,631 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2 2020-07-30 03:25:55,634 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker 2020-07-30 03:25:55,636 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:55,638 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify 2020-07-30 03:25:55,641 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by 2020-07-30 03:25:55,643 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or 2020-07-30 03:25:55,646 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version. 2020-07-30 03:25:55,648 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:55,650 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful, 2020-07-30 03:25:55,653 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2020-07-30 03:25:55,655 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2020-07-30 03:25:55,657 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details. 2020-07-30 03:25:55,660 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:25:55,662 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License 2020-07-30 03:25:55,664 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>. 2020-07-30 03:25:58,415 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:26:49,273 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit. 2020-07-30 03:26:49,277 - INFO - [MainThread] cura.CuraApplication.closeApplication [577]: Close application 2020-07-30 03:26:49,286 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [470]: Shutting down cura 2020-07-30 03:26:49,324 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process 2020-07-30 03:26:49,324 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [310]: Killing engine process 2020-07-30 03:26:49,325 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [313]: Engine process is killed. Received return code 1 2020-07-30 03:28:27,240 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger 2020-07-30 03:28:27,256 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker 2020-07-30 03:28:27,271 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater 2020-07-30 03:28:27,271 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader 2020-07-30 03:28:27,287 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter 2020-07-30 03:28:27,287 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader 2020-07-30 03:28:27,303 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader 2020-07-30 03:28:27,303 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter 2020-07-30 03:28:27,318 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader 2020-07-30 03:28:27,334 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader 2020-07-30 03:28:27,334 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider 2020-07-30 03:28:27,350 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice 2020-07-30 03:28:27,350 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction 2020-07-30 03:28:27,367 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker 2020-07-30 03:28:27,367 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage 2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool 2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin 2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage 2020-07-30 03:28:27,399 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage 2020-07-30 03:28:27,414 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice 2020-07-30 03:28:27,414 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger 2020-07-30 03:28:27,430 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView 2020-07-30 03:28:27,445 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin 2020-07-30 03:28:27,445 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView 2020-07-30 03:28:27,464 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser 2020-07-30 03:28:27,493 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:27,494 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:27,495 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:27,497 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:27,499 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:27,501 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:27,503 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:27,504 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:27,510 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox 2020-07-30 03:28:27,513 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool 2020-07-30 03:28:27,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool 2020-07-30 03:28:27,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool 2020-07-30 03:28:27,544 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool 2020-07-30 03:28:27,544 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool 2020-07-30 03:28:27,559 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool 2020-07-30 03:28:27,559 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader 2020-07-30 03:28:27,575 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader 2020-07-30 03:28:27,591 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter 2020-07-30 03:28:27,591 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions 2020-07-30 03:28:27,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting 2020-07-30 03:28:27,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker 2020-07-30 03:28:27,703 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura 2020-07-30 03:28:27,977 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting 2020-07-30 03:28:28,130 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22 2020-07-30 03:28:28,192 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24 2020-07-30 03:28:28,241 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26 2020-07-30 03:28:28,288 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27 2020-07-30 03:28:28,351 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30 2020-07-30 03:28:28,398 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31 2020-07-30 03:28:28,475 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33 2020-07-30 03:28:28,504 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34 2020-07-30 03:28:28,551 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35 2020-07-30 03:28:28,614 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40 2020-07-30 03:28:28,665 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41 2020-07-30 03:28:28,711 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42 2020-07-30 03:28:28,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43 2020-07-30 03:28:28,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44 2020-07-30 03:28:28,743 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45 2020-07-30 03:28:28,758 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46 2020-07-30 03:28:28,758 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462 2020-07-30 03:28:28,774 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView 2020-07-30 03:28:28,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader 2020-07-30 03:28:28,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile 2020-07-30 03:28:28,805 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView 2020-07-30 03:28:28,805 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.096127510070801 seconds 2020-07-30 03:28:28,821 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade. 2020-07-30 03:28:28,836 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:28:31,469 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 2.429734945297241 seconds 2020-07-30 03:28:31,594 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0 2020-07-30 03:28:31,594 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker 2020-07-30 03:28:31,910 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3] 2020-07-30 03:28:32,229 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0] 2020-07-30 03:28:32,229 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything 2020-07-30 03:28:32,229 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check. 2020-07-30 03:28:32,652 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.4233269691467285 seconds. 2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight 2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ 2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix 2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse 2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements 2020-07-30 03:28:32,746 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager 2020-07-30 03:28:32,746 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager 2020-07-30 03:28:32,746 - INFO - [Thread-2] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2020-07-30 03:28:32,761 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds 2020-07-30 03:28:32,761 - DEBUG - [Thread-2] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices 2020-07-30 03:28:32,824 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective. 2020-07-30 03:28:32,840 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json 2020-07-30 03:28:33,068 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light 2020-07-30 03:28:33,443 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled. 2020-07-30 03:28:33,913 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view. 2020-07-30 03:28:34,038 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created. 2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:28:35,216 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:28:35,216 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x0000020BAB8DE510> is deprecated (since 4.4): Please use extruderList instead. 2020-07-30 03:28:35,325 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double 2020-07-30 03:28:35,341 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage 2020-07-30 03:28:35,403 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:28:35,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:28:35,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:28:35,466 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView 2020-07-30 03:28:35,466 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view. 2020-07-30 03:28:35,482 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created. 2020-07-30 03:28:35,482 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml] 2020-07-30 03:28:35,497 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server. 2020-07-30 03:28:35,497 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from 2020-07-30 03:28:35,513 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2020-07-30 03:28:35,513 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 9.29615831375122 seconds 2020-07-30 03:28:35,513 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [cec5b5724b7941d39fa60aade141703d] started 2020-07-30 03:28:35,528 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:28:35,544 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:28:35,544 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:28:35,991 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:28:35,995 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:28:36,261 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True 2020-07-30 03:28:36,269 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems. 2020-07-30 03:28:36,271 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324 2020-07-30 03:28:36,274 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel 2020-07-30 03:28:36,277 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630 2020-07-30 03:28:36,279 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0 2020-07-30 03:28:36,282 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:28:36,295 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]... 2020-07-30 03:28:36,305 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]... 2020-07-30 03:28:36,316 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:28:36,327 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]... 2020-07-30 03:28:36,344 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]... 2020-07-30 03:28:36,362 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:28:36,378 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]... 2020-07-30 03:28:36,390 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:28:36,406 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:28:36,415 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]... 2020-07-30 03:28:36,433 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:28:36,443 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]... 2020-07-30 03:28:36,455 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]... 2020-07-30 03:28:36,488 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:28:37,021 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [cec5b5724b7941d39fa60aade141703d] finished. 2020-07-30 03:28:37,024 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:28:37,144 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 3.7s 2020-07-30 03:28:42,503 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice... 2020-07-30 03:28:42,503 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]! 2020-07-30 03:28:42,504 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [263]: Build plate 0 has no objects to be sliced, skipping 2020-07-30 03:28:43,008 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice... 2020-07-30 03:28:43,009 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [241]: Slice unnecessary, nothing has changed that needs reslicing. 2020-07-30 03:28:52,509 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:28:54,559 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit. 2020-07-30 03:28:54,563 - INFO - [MainThread] cura.CuraApplication.closeApplication [577]: Close application 2020-07-30 03:28:54,576 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [470]: Shutting down cura 2020-07-30 03:28:54,609 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process 2020-07-30 03:28:54,609 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [310]: Killing engine process 2020-07-30 03:28:54,611 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [313]: Engine process is killed. Received return code 1 2020-07-30 03:28:58,509 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger 2020-07-30 03:28:58,520 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker 2020-07-30 03:28:58,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater 2020-07-30 03:28:58,534 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader 2020-07-30 03:28:58,541 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter 2020-07-30 03:28:58,549 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader 2020-07-30 03:28:58,564 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader 2020-07-30 03:28:58,571 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter 2020-07-30 03:28:58,581 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader 2020-07-30 03:28:58,589 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader 2020-07-30 03:28:58,597 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider 2020-07-30 03:28:58,606 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice 2020-07-30 03:28:58,614 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction 2020-07-30 03:28:58,622 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker 2020-07-30 03:28:58,630 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage 2020-07-30 03:28:58,639 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool 2020-07-30 03:28:58,647 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin 2020-07-30 03:28:58,654 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage 2020-07-30 03:28:58,660 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage 2020-07-30 03:28:58,673 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice 2020-07-30 03:28:58,679 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger 2020-07-30 03:28:58,695 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView 2020-07-30 03:28:58,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin 2020-07-30 03:28:58,714 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView 2020-07-30 03:28:58,722 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser 2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace 2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None 2020-07-30 03:28:58,765 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox 2020-07-30 03:28:58,775 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool 2020-07-30 03:28:58,785 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool 2020-07-30 03:28:58,802 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool 2020-07-30 03:28:58,817 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool 2020-07-30 03:28:58,821 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool 2020-07-30 03:28:58,825 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool 2020-07-30 03:28:58,840 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader 2020-07-30 03:28:58,845 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader 2020-07-30 03:28:58,855 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter 2020-07-30 03:28:58,865 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions 2020-07-30 03:28:58,965 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting 2020-07-30 03:28:58,965 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura 2020-07-30 03:28:58,975 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker 2020-07-30 03:28:59,329 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting 2020-07-30 03:28:59,534 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22 2020-07-30 03:28:59,600 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24 2020-07-30 03:28:59,666 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26 2020-07-30 03:28:59,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27 2020-07-30 03:28:59,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30 2020-07-30 03:28:59,854 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31 2020-07-30 03:28:59,920 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33 2020-07-30 03:28:59,970 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34 2020-07-30 03:28:59,985 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35 2020-07-30 03:28:59,994 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40 2020-07-30 03:29:00,003 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41 2020-07-30 03:29:00,013 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42 2020-07-30 03:29:00,022 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43 2020-07-30 03:29:00,030 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44 2020-07-30 03:29:00,039 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45 2020-07-30 03:29:00,048 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46 2020-07-30 03:29:00,056 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462 2020-07-30 03:29:00,063 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView 2020-07-30 03:29:00,077 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader 2020-07-30 03:29:00,099 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile 2020-07-30 03:29:00,107 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView 2020-07-30 03:29:00,109 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.1176958084106445 seconds 2020-07-30 03:29:00,120 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade. 2020-07-30 03:29:00,145 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,149 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,152 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,155 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,158 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,160 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,162 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,165 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,165 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,171 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,174 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,177 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,181 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,183 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,186 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,188 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,191 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,195 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,198 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,200 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,203 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,211 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,214 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,217 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,223 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,228 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,234 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it 2020-07-30 03:29:00,240 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it 2020-07-30 03:29:00,771 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice... 2020-07-30 03:29:00,772 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [241]: Slice unnecessary, nothing has changed that needs reslicing. 2020-07-30 03:29:02,916 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 2.5581002235412598 seconds 2020-07-30 03:29:03,100 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0 2020-07-30 03:29:03,105 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker 2020-07-30 03:29:03,229 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3] 2020-07-30 03:29:03,337 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0] 2020-07-30 03:29:03,340 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything 2020-07-30 03:29:03,340 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check. 2020-07-30 03:29:03,819 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.47146105766296387 seconds. 2020-07-30 03:29:03,823 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight 2020-07-30 03:29:03,826 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ 2020-07-30 03:29:03,828 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix 2020-07-30 03:29:03,829 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD 2020-07-30 03:29:03,830 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD 2020-07-30 03:29:03,831 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange 2020-07-30 03:29:03,833 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange 2020-07-30 03:29:03,835 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight 2020-07-30 03:29:03,836 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet 2020-07-30 03:29:03,838 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier 2020-07-30 03:29:03,839 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue 2020-07-30 03:29:03,841 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace 2020-07-30 03:29:03,844 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch 2020-07-30 03:29:03,845 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse 2020-07-30 03:29:03,846 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements 2020-07-30 03:29:03,916 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager 2020-07-30 03:29:03,919 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager 2020-07-30 03:29:03,923 - INFO - [Thread-2] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2020-07-30 03:29:03,929 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds 2020-07-30 03:29:03,931 - DEBUG - [Thread-2] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices 2020-07-30 03:29:04,002 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective. 2020-07-30 03:29:04,025 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-dark\theme.json 2020-07-30 03:29:04,028 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json 2020-07-30 03:29:04,255 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light 2020-07-30 03:29:04,255 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-dark 2020-07-30 03:29:04,630 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled. 2020-07-30 03:29:05,185 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view. 2020-07-30 03:29:05,327 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created. 2020-07-30 03:29:05,425 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:29:05,435 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:29:05,435 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token 2020-07-30 03:29:06,525 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:29:06,525 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x00000211BBA9E510> is deprecated (since 4.4): Please use extruderList instead. 2020-07-30 03:29:06,635 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double 2020-07-30 03:29:06,645 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage 2020-07-30 03:29:06,725 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel. 2020-07-30 03:29:06,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:29:06,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined 2020-07-30 03:29:06,785 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView 2020-07-30 03:29:06,795 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view. 2020-07-30 03:29:06,795 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created. 2020-07-30 03:29:06,795 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml] 2020-07-30 03:29:06,825 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server. 2020-07-30 03:29:06,825 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from 2020-07-30 03:29:06,825 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request 2020-07-30 03:29:06,835 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 9.39784550666809 seconds 2020-07-30 03:29:06,845 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [49da1f969ba84816bb7dba79b269535b] started 2020-07-30 03:29:06,845 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:29:06,855 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:29:06,875 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:29:07,362 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel. 2020-07-30 03:29:07,366 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel. 2020-07-30 03:29:07,592 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True 2020-07-30 03:29:07,601 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems. 2020-07-30 03:29:07,604 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324 2020-07-30 03:29:07,606 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel 2020-07-30 03:29:07,609 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630 2020-07-30 03:29:07,611 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0 2020-07-30 03:29:07,613 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:29:07,628 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]... 2020-07-30 03:29:07,642 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]... 2020-07-30 03:29:07,655 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:29:07,670 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]... 2020-07-30 03:29:07,692 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]... 2020-07-30 03:29:07,715 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:29:07,736 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]... 2020-07-30 03:29:07,750 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]... 2020-07-30 03:29:07,770 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:29:07,783 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]... 2020-07-30 03:29:07,804 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]... 2020-07-30 03:29:07,819 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]... 2020-07-30 03:29:07,833 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]... 2020-07-30 03:29:07,869 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]... 2020-07-30 03:29:08,489 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 3.9s 2020-07-30 03:29:10,125 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [49da1f969ba84816bb7dba79b269535b] finished. 2020-07-30 03:29:10,125 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop 2020-07-30 03:29:16,841 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles 2020-07-30 03:29:28,506 - INFO - [Thread-4] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data. 2020-07-30 03:29:28,838 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.1376330852508545 seconds 2020-07-30 03:29:28,889 - DEBUG - [Thread-4] STLReader.STLReader._read [104]: Loaded a mesh with 4670010 vertices 2020-07-30 03:29:29,935 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 1.0363752841949463 seconds. 6444 input vertices. 6444 output vertices. 2020-07-30 03:29:30,575 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 2.1 seconds 2020-07-30 03:29:31,565 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.9870142936706543 seconds. 6443 input vertices. 6443 output vertices. 2020-07-30 03:29:31,588 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x00000211CA8CD4E0>, took 0ms 2020-07-30 03:29:32,184 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice... 2020-07-30 03:29:32,184 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]! 2020-07-30 03:29:32,189 - WARNING - [Thread-5] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x00000211BBA9E510> is deprecated (since 4.4): Please use extruderList instead. 2020-07-30 03:29:32,191 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]... 2020-07-30 03:29:32,630 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [444]: Sending slice message took 0.4448084831237793 seconds 2020-07-30 03:29:34,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has disconnected faces! 2020-07-30 03:29:34,460 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has overlapping faces! 2020-07-30 03:29:35,403 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] -s acceleration_support_infill="500" -s machine_settings="0" -s material_flow_dependent_temperature="False" -s retraction_retract_speed="25" -s wireframe_up_half_speed="0.3" -s support_type="everywhere" -s hole_xy_offset="0" -s z_seam_x="117.5" -s skirt_brim_speed="20.0" -s prime_tower_enable="False" -s infill_overlap_mm="0.12" -s infill_support_enabled="False" -s support_xy_distance="0.8" -s cool_fan_enabled="True" -s ironing_pattern="zigzag" -s machine_max_acceleration_y="500" -s jerk_topbottom="8" -s jerk_wall_0="8" -s ironing_line_spacing="0.1" -s speed_ironing="16.666666666666668" -s raft_base_line_width="0.8" -s wireframe_top_jump="0.6" -s machine_steps_per_mm_z="50" -s gradual_support_infill_step_height="1" -s wireframe_top_delay="0" -s support_skip_zag_per_mm="20" -s fill_outline_gaps="False" -s wireframe_drag_along="0.6" -s magic_fuzzy_skin_thickness="0.3" -s cool_min_layer_time_fan_speed_max="10" -s default_material_bed_temperature="50" -s acceleration_ironing="500" -s jerk_support_bottom="8" -s raft_interface_thickness="0.30000000000000004" -s infill_pattern="cubic" -s raft_surface_layers="2" -s travel="0" -s max_extrusion_before_wipe="10" -s wireframe_printspeed_bottom="5" -s mesh_position_y="0" -s small_feature_max_length="0.0" -s acceleration_layer_0="500" -s skin_overlap="10.0" -s skirt_line_count="3" -s wipe_hop_speed="5" -s default_material_print_temperature="210" -s support_tower_maximum_supported_diameter="3.0" -s jerk_print_layer_0="8" -s jerk_enabled="False" -s flow_rate_max_extrusion_offset="0" -s machine_buildplate_type="glass" -s brim_gap="0" -s skin_no_small_gaps_heuristic="False" -s xy_offset="0" -s cool_fan_speed_0="0" -s acceleration_wall_0="500" -s machine_heated_build_volume="False" -s machine_name="Creality Ender-3" -s wireframe_roof_fall_down="2" -s machine_max_jerk_e="5" -s speed_support_infill="25.0" -s wall_line_width_x="0.4" -s bridge_skin_support_threshold="50" -s jerk_travel="8" -s material_anti_ooze_retraction_speed="5" -s infill_line_distance="6.0" -s switch_extruder_prime_speed="20" -s cool_lift_head="False" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s travel_compensate_overlapping_walls_enabled="True" -s small_hole_max_size="0" -s material_bed_temperature="50" -s support_line_width="0.4" -s wireframe_printspeed_up="5" -s support_interface_offset="0.0" -s minimum_roof_area="10" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s bridge_skin_speed_3="12.5" -s jerk_skirt_brim="8" -s support_brim_line_count="10" -s acceleration_support="500" -s travel_retract_before_outer_wall="True" -s wall_0_wipe_dist="0.0" -s wipe_hop_amount="0.2" -s top_layers="4" -s skirt_brim_line_width="0.4" -s support_infill_extruder_nr="0" -s speed_equalize_flow_max="150" -s wall_overhang_angle="90" -s speed_infill="50.0" -s draft_shield_enabled="False" -s prime_tower_line_width="0.4" -s retraction_combing_max_distance="30" -s material_adhesion_tendency="10" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s machine_depth="235" -s raft_base_jerk="8" -s time="03:29:32" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s extruder_prime_pos_z="0" -s machine_nozzle_expansion_angle="45" -s clean_between_layers="False" -s support_roof_extruder_nr="0" -s material_print_temperature_layer_0="210" -s travel_avoid_distance="0.625" -s line_width="0.4" -s roofing_material_flow="100" -s wipe_retraction_retract_speed="25" -s travel_avoid_other_parts="True" -s z_seam_y="235" -s wireframe_printspeed_down="5" -s support_top_distance="0.2" -s machine_endstop_positive_direction_z="True" -s prime_tower_min_volume="6" -s wireframe_roof_inset="3" -s skin_material_flow="100" -s support_bottom_pattern="grid" -s machine_nozzle_id="unknown" -s resolution="0" -s prime_tower_position_y="203.6" -s machine_max_feedrate_z="10" -s minimum_polygon_circumference="1.0" -s jerk_ironing="8" -s ooze_shield_dist="2" -s wireframe_height="3" -s layer_height="0.2" -s machine_show_variants="False" -s wall_thickness="0.8" -s spaghetti_inset="0.2" -s material_initial_print_temperature="210" -s filter_out_tiny_gaps="False" -s wireframe_nozzle_clearance="1" -s material_no_load_move_factor="0.940860215" -s speed_travel="150.0" -s mold_roof_height="0.5" -s top_skin_preshrink="0.8" -s draft_shield_dist="10" -s wireframe_fall_down="0.5" -s machine_height="250" -s support_tree_angle="40" -s initial_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s meshfix_maximum_resolution="0.05" -s retraction_prime_speed="25" -s z_seam_type="back" -s acceleration_enabled="False" -s material_surface_energy="100" -s support_extruder_nr_layer_0="0" -s support_supported_skin_fan_speed="100" -s minimum_support_area="2" -s bottom_thickness="0.8" -s wireframe_bottom_delay="0" -s initial_layer_line_width_factor="100.0" -s wall_line_count="2" -s mold_angle="40" -s machine_max_acceleration_z="100" -s acceleration_print="500" -s material_standby_temperature="150" -s support_roof_density="33.333" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s mold_enabled="False" -s skin_outline_count="1" -s acceleration_topbottom="500" -s layer_start_x="0.0" -s min_infill_area="0" -s support_brim_enable="True" -s infill_overlap="30.0" -s wireframe_straight_before_down="20" -s bridge_skin_density_2="75" -s support_bottom_line_width="0.4" -s acceleration_support_roof="500" -s bridge_skin_speed_2="12.5" -s retraction_hop_after_extruder_switch="True" -s jerk_support_interface="8" -s jerk_layer_0="8" -s switch_extruder_retraction_speeds="20" -s machine_disallowed_areas="[[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]], [[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]]" -s raft_base_fan_speed="0" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s machine_shape="rectangular" -s support_roof_offset="0.0" -s cross_infill_density_image="" -s brim_outside_only="True" -s support_roof_line_distance="2.4000240002400024" -s support_roof_enable="True" -s raft_surface_jerk="8" -s speed_z_hop="5" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s machine_max_feedrate_y="500" -s support_mesh_drop_down="True" -s raft_interface_fan_speed="0" -s top_bottom_thickness="0.8" -s support_tree_branch_diameter="2" -s roofing_angles="[ ]" -s z_seam_corner="z_seam_corner_weighted" -s carve_multiple_volumes="False" -s retraction_amount="6.5" -s fill_perimeter_gaps="everywhere" -s infill_material_flow="100" -s bridge_skin_density="100" -s material_print_temp_wait="True" -s support_bottom_height="0.8" -s gantry_height="25" -s support_interface_skip_height="0.2" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s prime_tower_position_x="223.6" -s raft_surface_thickness="0.2" -s small_feature_speed_factor_0="50" -s wipe_retraction_amount="6.5" -s machine_minimum_feedrate="0.0" -s machine_steps_per_mm_y="50" -s cool_fan_speed="100.0" -s infill_multiplier="1" -s support_tree_branch_diameter_angle="5" -s wireframe_flow_connection="100" -s material_flush_purge_length="60" -s adaptive_layer_height_variation="0.04" -s flow_rate_extrusion_offset_factor="100" -s support_tower_diameter="3.0" -s material_end_of_filament_purge_speed="0.5" -s retraction_min_travel="1.5" -s magic_fuzzy_skin_outside_only="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s support_bottom_material_flow="100" -s infill_extruder_nr="-1" -s wireframe_enabled="False" -s material_diameter="1.75" -s outer_inset_first="False" -s center_object="False" -s raft_smoothing="5" -s jerk_support="8" -s adhesion_extruder_nr="0" -s relative_extrusion="False" -s material_bed_temp_prepend="True" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s skirt_gap="10.0" -s support_zag_skip_count="10" -s wipe_pause="0" -s retraction_count_max="100" -s extruder_prime_pos_abs="False" -s ooze_shield_angle="60" -s adaptive_layer_height_variation_step="0.04" -s machine_end_gcode="G91 ;Relative positioning 2020-07-30 03:29:35,405 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 F2700 ;Retract a bit 2020-07-30 03:29:35,407 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 Z0.2 F2400 ;Retract and raise Z 2020-07-30 03:29:35,410 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y5 F3000 ;Wipe out 2020-07-30 03:29:35,413 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z10 ;Raise Z more 2020-07-30 03:29:35,415 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G90 ;Absolute positionning 2020-07-30 03:29:35,418 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:35,420 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0 Y235 ;Present print 2020-07-30 03:29:35,422 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M106 S0 ;Turn-off fan 2020-07-30 03:29:35,425 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M104 S0 ;Turn-off hotend 2020-07-30 03:29:35,427 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M140 S0 ;Turn-off bed 2020-07-30 03:29:35,430 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:35,432 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M84 X Y E ;Disable all steppers but Z 2020-07-30 03:29:35,434 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] " -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_crystallinity="False" -s raft_base_line_spacing="1.6" -s raft_airgap="0.3" -s bridge_skin_material_flow="60" -s wireframe_printspeed="5" -s cutting_mesh="False" -s material_extrusion_cool_down_speed="0.7" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_guid="" -s connect_infill_polygons="False" -s support_xy_overrides_z="xy_overrides_z" -s skirt_brim_minimal_length="250" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s support_interface_extruder_nr="0" -s infill_line_width="0.4" -s prime_tower_brim_enable="False" -s bottom_layers="4" -s meshfix="0" -s speed_wall_0="25.0" -s wall_x_extruder_nr="-1" -s coasting_volume="0.064" -s shell="0" -s travel_avoid_supports="True" -s material_end_of_filament_purge_length="20" -s support_connect_zigzags="True" -s support_bottom_offset="0.0" -s support_interface_enable="True" -s support_brim_width="4" -s support_roof_height="0.8" -s prime_tower_size="20" -s remove_empty_first_layers="True" -s support_roof_line_width="0.4" -s optimize_wall_printing_order="True" -s raft_base_speed="18.75" -s machine_heat_zone_length="16" -s date="30-07-2020" -s machine_start_gcode="; Ender 3 Custom Start G-code 2020-07-30 03:29:35,436 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder 2020-07-30 03:29:35,437 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G28 ; Home all axes 2020-07-30 03:29:35,440 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2020-07-30 03:29:35,442 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position 2020-07-30 03:29:35,445 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line 2020-07-30 03:29:35,447 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little 2020-07-30 03:29:35,449 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line 2020-07-30 03:29:35,452 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder 2020-07-30 03:29:35,454 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed 2020-07-30 03:29:35,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" -s machine_max_acceleration_e="5000" -s acceleration_roofing="500" -s retraction_hop_enabled="False" -s spaghetti_infill_stepped="True" -s support_roof_material_flow="100" -s machine_steps_per_mm_e="1600" -s wall_0_extruder_nr="-1" -s machine_firmware_retract="False" -s infill_support_angle="40" -s material_bed_temperature_layer_0="50" -s roofing_layer_count="0" -s speed_slowdown_layers="2" -s speed_topbottom="25.0" -s wireframe_strategy="compensate" -s jerk_support_roof="8" -s wireframe_roof_drag_along="0.8" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="500" -s support_pattern="zigzag" -s support_initial_layer_line_distance="2.0" -s ironing_flow="10.0" -s support_enable="False" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_use_towers="False" -s jerk_support_infill="8" -s support_infill_rate="20" -s speed_equalize_flow_enabled="False" -s draft_shield_height="10" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s limit_support_retractions="True" -s acceleration_print_layer_0="500" -s bridge_enable_more_layers="True" -s skin_edge_support_thickness="0" -s brim_line_count="20" -s machine_nozzle_size="0.4" -s skin_angles="[ ]" -s speed_support_bottom="25.0" -s wireframe_roof_outer_delay="0.2" -s machine_nozzle_head_distance="3" -s infill_mesh_order="0" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50.0" -s ironing_enabled="False" -s support_tree_branch_distance="1" -s cool_fan_speed_min="100.0" -s switch_extruder_extra_prime_amount="0" -s support_conical_enabled="False" -s spaghetti_max_height="2.0" -s support_offset="0" -s bridge_fan_speed_2="0" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s material_final_print_temperature="210" -s raft_jerk="8" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s speed_roofing="25.0" -s jerk_travel_layer_0="8" -s blackmagic="0" -s bridge_wall_material_flow="50" -s support_tree_enable="False" -s skin_overlap_mm="0.04" -s raft_margin="15" -s infill_mesh="False" -s wipe_move_distance="20" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s coasting_enable="False" -s support_infill_sparse_thickness="0.2" -s support_conical_angle="30" -s bridge_wall_coast="100" -s wall_0_material_flow="100" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s cool_min_layer_time="10" -s raft_surface_line_spacing="0.4" -s material_break_retracted_position="-50" -s sub_div_rad_add="0.4" -s mold_width="5" -s z_seam_position="back" -s speed="0" -s speed_print="50.0" -s brim_replaces_support="False" -s day="Thu" -s spaghetti_infill_enabled="False" -s acceleration_support_interface="500" -s wall_line_width="0.4" -s acceleration_travel="500" -s skirt_brim_material_flow="100" -s retraction_combing="noskin" -s wireframe_printspeed_flat="5" -s support_extruder_nr="0" -s layer_start_y="0.0" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s bridge_skin_material_flow_3="110" -s prime_blob_enable="False" -s alternate_carve_order="True" -s material_break_preparation_retracted_position="-16" -s support_interface_density="33.333" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s raft_acceleration="500" -s acceleration_wall_x="500" -s switch_extruder_retraction_amount="16" -s cross_support_density_image="" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s infill_offset_y="0" -s prime_tower_flow="100" -s raft_interface_acceleration="500" -s experimental="0" -s ironing_only_highest_layer="False" -s bridge_settings_enabled="False" -s mesh_position_x="0" -s extruder_prime_pos_x="0" -s wipe_retraction_speed="25" -s meshfix_union_all="True" -s machine_extruder_count="1" -s layer_0_z_overlap="0.15" -s speed_layer_0="20.0" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s wall_0_inset="0" -s speed_support_interface="25.0" -s ironing_inset="0.2" -s skin_preshrink="0.8" -s minimum_interface_area="10" -s infill_before_walls="False" -s material="0" -s expand_skins_expand_distance="0.8" -s coasting_speed="90" -s speed_wall="25.0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s zig_zaggify_infill="False" -s material_flow_layer_0="100" -s material_anti_ooze_retracted_position="-4" -s layer_height_0="0.2" -s support_roof_angles="[ ]" -s infill_wipe_dist="0.0" -s meshfix_maximum_deviation="0.05" -s machine_max_acceleration_x="500" -s jerk_wall="8" -s infill_offset_x="0" -s machine_steps_per_mm_x="50" -s raft_interface_jerk="8" -s machine_nozzle_temp_enabled="True" -s raft_surface_speed="25.0" -s material_break_speed="25" -s skin_edge_support_layers="0" -s support="0" -s support_interface_material_flow="100" -s speed_wall_x="25.0" -s material_print_temp_prepend="True" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_acceleration="500" -s min_skin_width_for_expansion="4.898587196589413e-17" -s jerk_wall_x="8" -s machine_center_is_zero="False" -s ooze_shield_enabled="False" -s bridge_fan_speed="100" -s support_wall_count="1" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="25" -s wipe_retraction_prime_speed="25" -s support_material_flow="100" -s travel_compensate_overlapping_walls_0_enabled="False" -s support_mesh="False" -s slicing_tolerance="middle" -s roofing_pattern="lines" -s support_interface_pattern="grid" -s wall_material_flow="100" -s raft_fan_speed="0" -s acceleration_infill="500" -s wireframe_flat_delay="0.1" -s magic_fuzzy_skin_enabled="False" -s draft_shield_height_limitation="full" -s bridge_wall_min_length="5" -s alternate_extra_perimeter="False" -s retraction_hop="0.2" -s dual="0" -s material_break_temperature="50" -s adaptive_layer_height_enabled="False" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_endstop_positive_direction_x="False" -s machine_max_feedrate_x="500" -s infill_wall_line_count="0" -s conical_overhang_enabled="False" -s raft_speed="25.0" -s support_roof_pattern="grid" -s adaptive_layer_height_threshold="0.2" -s jerk_prime_tower="8" -s print_bed_temperature="50" -s machine_width="235" -s acceleration_travel_layer_0="500" -s support_bottom_stair_step_height="0.3" -s magic_spiralize="False" -s machine_extruders_share_heater="False" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="210" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s wall_extruder_nr="-1" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s support_angle="45" -s gradual_infill_step_height="1.5" -s support_conical_min_width="5.0" -s material_bed_temp_wait="True" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s material_print_temperature="210" -s adhesion_type="skirt" -s roofing_line_width="0.4" -s wireframe_flow_flat="100" -s support_bottom_angles="[ ]" -s material_break_preparation_speed="2" -s wireframe_flow="100" -s speed_travel_layer_0="100.0" -s support_bottom_extruder_nr="0" -s infill="0" -s raft_interface_line_spacing="1.0" -s support_tree_collision_resolution="0.2" -s support_join_distance="2.0" -s machine_nozzle_cool_down_speed="2.0" -s wall_min_flow_retract="False" -s jerk_infill="8" -s bridge_wall_speed="12.5" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s magic_fuzzy_skin_point_density="1.25" -s machine_heated_bed="True" -s support_bottom_stair_step_width="5.0" -s build_volume_temperature="28" -s bottom_skin_expand_distance="0.8" -s switch_extruder_retraction_speed="20" -s anti_overhang_mesh="False" -s top_bottom_extruder_nr="-1" -s gradual_support_infill_steps="0" -s roofing_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s support_interface_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s support_bottom_density="33.333" -s support_xy_distance_overhang="0.4" -s print_sequence="all_at_once" -s infill_angles="[ ]" -s machine_max_feedrate_e="50" -s top_bottom_pattern_0="lines" -s raft_surface_line_width="0.4" -s retraction_hop_only_when_collides="False" -s cooling="0" -s retraction_extra_prime_amount="0" -s bridge_sparse_infill_max_density="0" -s print_temperature="210" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s gradual_infill_steps="0" -s initial_bottom_layers="4" -s cool_fan_full_at_height="0.6000000000000001" -s material_flow="100" -s retraction_extrusion_window="10" -s retraction_hop_after_extruder_switch_height="0.2" -s z_seam_relative="False" -s small_feature_speed_factor="50" -s bottom_skin_preshrink="0.8" -s top_thickness="0.8" -s platform_adhesion="0" -s support_tower_roof_angle="65" -s command_line_settings="0" -s acceleration_support_bottom="500" -s jerk_print="8" -s extruder_prime_pos_y="0" -s extruders_enabled_count="1" -s brim_width="8.0" -s support_bottom_line_distance="2.4000240002400024" -s wall_min_flow="0" -s travel_speed="150.0" -s material_flush_purge_speed="0.5" -s bridge_fan_speed_3="0" -s support_skip_some_zags="False" -s wipe_repeat_count="5" -s raft_surface_fan_speed="0" -s connect_skin_polygons="False" -s support_z_distance="0.2" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s retract_at_layer_change="False" -s wipe_brush_pos_x="100" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s raft_surface_acceleration="500" -s support_interface_height="0.8" -s machine_max_jerk_xy="10" -s smooth_spiralized_contours="True" -e0 -s acceleration_support_infill="500" -s resolution="0" -s machine_settings="0" -s machine_extruder_end_pos_x="0" -s material_flow_dependent_temperature="False" -s retraction_retract_speed="45" -s bridge_sparse_infill_max_density="0" -s hole_xy_offset="0" -s z_seam_x="117.5" -s skirt_brim_speed="20.0" -s infill_overlap_mm="0.12" -s material_break_preparation_speed="2" -s infill_support_enabled="False" -s support_xy_distance="0.8" -s cool_fan_enabled="True" -s ironing_pattern="zigzag" -s jerk_topbottom="8" -s jerk_wall_0="8" -s ironing_line_spacing="0.1" -s speed_ironing="16.666666666666668" -s raft_base_line_width="0.8" -s machine_steps_per_mm_z="50" -s gradual_support_infill_step_height="1" -s support_skip_zag_per_mm="20" -s fill_outline_gaps="False" -s magic_fuzzy_skin_thickness="0.3" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_ironing="500" -s jerk_support_bottom="8" -s raft_interface_thickness="0.30000000000000004" -s infill_pattern="cubic" -s raft_surface_layers="2" -s travel="0" -s max_extrusion_before_wipe="10" -s retraction_prime_speed="45" -s z_seam_type="back" -s travel_compensate_overlapping_walls_0_enabled="False" -s mesh_position_y="0" -s small_feature_max_length="0.0" -s acceleration_layer_0="500" -s skin_overlap="10.0" -s skirt_line_count="3" -s wipe_hop_speed="5" -s default_material_print_temperature="200" -s support_tower_maximum_supported_diameter="3.0" -s jerk_print_layer_0="8" -s brim_gap="0" -s skin_no_small_gaps_heuristic="False" -s xy_offset="0" -s cool_fan_speed_0="0" -s acceleration_wall_0="500" -s machine_extruder_end_pos_abs="False" -s speed_support_infill="25.0" -s wall_line_width_x="0.4" -s bridge_skin_support_threshold="50" -s material_anti_ooze_retraction_speed="5" -s infill_line_distance="6.0" -s roofing_line_width="0.4" -s speed_travel_layer_0="100.0" -s switch_extruder_prime_speed="20" -s cool_lift_head="False" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s material_extrusion_cool_down_speed="0.7" -s travel_compensate_overlapping_walls_enabled="True" -s small_hole_max_size="0" -s support_line_width="0.4" -s machine_extruder_start_pos_x="0" -s extruder_prime_pos_z="0" -s support_interface_offset="0.0" -s minimum_roof_area="10" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s bridge_skin_speed_3="12.5" -s jerk_skirt_brim="8" -s support_brim_line_count="10" -s acceleration_support="500" -s wall_0_wipe_dist="0.0" -s wipe_hop_amount="0.2" -s top_layers="4" -s skirt_brim_line_width="0.4" -s speed_equalize_flow_max="150" -s wall_overhang_angle="90" -s speed_infill="50.0" -s prime_tower_line_width="0.4" -s machine_extruder_start_pos_y="0" -s support_wall_count="1" -s bridge_fan_speed="100" -s material_anti_ooze_retracted_position="-4" -s support_roof_angles="[ ]" -s material_flow_layer_0="100" -s infill_wipe_dist="0.0" -s meshfix_maximum_deviation="0.05" -s material_break_speed="25" -s skin_edge_support_layers="0" -s support="0" -s bridge_fan_speed_2="0" -s support_offset="0" -s raft_interface_jerk="8" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s min_skin_width_for_expansion="4.898587196589413e-17" -s roofing_material_flow="100" -s zig_zaggify_infill="False" -s machine_nozzle_heat_up_speed="2.0" -s wipe_hop_enable="False" -s minimum_interface_area="10" -s infill_before_walls="False" -s acceleration_print="500" -s material_standby_temperature="180" -s support_roof_density="33.333" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s jerk_travel="8" -s machine_extruder_cooling_fan_number="0" -s support_bottom_offset="0.0" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s mold_enabled="False" -s skin_outline_count="1" -s acceleration_topbottom="500" -s layer_start_x="0.0" -s min_infill_area="0" -s support_brim_enable="True" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s gradual_infill_step_height="1.5" -s support_conical_min_width="5.0" -s support_bottom_line_width="0.4" -s spaghetti_inset="0.2" -s acceleration_support_roof="500" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s bridge_skin_speed_2="12.5" -s jerk_layer_0="8" -s raft_jerk="8" -s material_final_print_temperature="200" -s support_tree_angle="40" -s switch_extruder_retraction_speeds="20" -s raft_base_fan_speed="0" -s machine_extruder_end_code="" -s skin_angles="[ ]" -s support_roof_offset="0.0" -s cross_infill_density_image="" -s brim_outside_only="True" -s support_roof_line_distance="2.4000240002400024" -s support_roof_enable="True" -s material_no_load_move_factor="0.940860215" -s raft_smoothing="5" -s jerk_support="8" -s small_feature_speed_factor_0="50" -s wipe_retraction_amount="5" -s machine_steps_per_mm_y="50" -s cool_fan_speed="100" -s blackmagic="0" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s infill_line_width="0.4" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s top_bottom_thickness="0.8" -s support_tree_branch_diameter="2" -s roofing_angles="[ ]" -s z_seam_corner="z_seam_corner_weighted" -s retraction_amount="5" -s fill_perimeter_gaps="everywhere" -s infill_material_flow="100" -s bridge_skin_density="100" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s support_bottom_height="0.8" -s support_interface_skip_height="0.2" -s bridge_enable_more_layers="True" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s speed_support_bottom="25.0" -s machine_nozzle_head_distance="3" -s skirt_brim_material_flow="100" -s raft_surface_speed="25.0" -s center_object="False" -s support_roof_line_width="0.4" -s optimize_wall_printing_order="True" -s raft_base_speed="18.75" -s material_surface_energy="100" -s machine_steps_per_mm_e="1600" -s support_infill_rate="20" -s speed_equalize_flow_enabled="False" -s speed_z_hop="5" -s raft_surface_jerk="8" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_use_towers="False" -s jerk_support_infill="8" -s jerk_wall_x="8" -s retraction_count_max="100" -s skin_material_flow="100" -s extruder_prime_pos_abs="False" -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s material_crystallinity="False" -s raft_base_line_spacing="1.6" -s speed_roofing="25.0" -s jerk_travel_layer_0="8" -s skin_edge_support_thickness="0" -s brim_line_count="20" -s machine_nozzle_size="0.4" -s bottom_layers="4" -s coasting_volume="0.064" -s shell="0" -s travel_avoid_supports="True" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s speed_wall_0="25.0" -s meshfix="0" -s bridge_skin_material_flow_3="110" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s connect_infill_polygons="False" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s retraction_speed="45" -s meshfix_maximum_travel_resolution="0.05" -s skin_overlap_mm="0.04" -s machine_heat_zone_length="16" -s support_interface_material_flow="100" -s speed_wall_x="25.0" -s support_initial_layer_line_distance="2.0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s raft_base_jerk="8" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s jerk_support_roof="8" -s extruder_prime_pos_y="0" -s ironing_enabled="False" -s support_tree_branch_distance="1" -s cool_fan_speed_min="100" -s switch_extruder_extra_prime_amount="0" -s support_conical_enabled="False" -s spaghetti_max_height="2.0" -s machine_extruder_start_pos_abs="False" -s infill_multiplier="1" -s raft_surface_thickness="0.2" -s machine_extruder_start_code="" -s z_seam_y="235" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s layer_start_y="0.0" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s support_bottom_material_flow="100" -s machine_min_cool_heat_time_window="50.0" -s cool_min_speed="10" -s travel_compensate_overlapping_walls_x_enabled="True" -s support_pattern="zigzag" -s infill_support_angle="40" -s support_xy_distance_overhang="0.4" -s speed_topbottom="25.0" -s prime_blob_enable="False" -s sub_div_rad_add="0.4" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s cool_min_layer_time="10" -s raft_surface_line_spacing="0.4" -s material_break_retracted_position="-50" -s bridge_wall_material_flow="50" -s meshfix_union_all="True" -s wipe_retraction_speed="45" -s extruder_prime_pos_x="0" -s acceleration_support_interface="500" -s wall_line_width="0.4" -s acceleration_travel="500" -s support_conical_angle="30" -s wall_line_count="2" -s outer_inset_first="False" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s support_tower_diameter="3.0" -s material_end_of_filament_purge_speed="0.5" -s material_break_preparation_retracted_position="-16" -s support_interface_density="33.333" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_nozzle_offset_x="0" -s raft_acceleration="500" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s acceleration_wall_x="500" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s switch_extruder_retraction_amount="16" -s cross_support_density_image="" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s infill_offset_y="0" -s support_interface_enable="True" -s support_brim_width="4" -s support_roof_height="0.8" -s coasting_speed="90" -s speed_wall="25.0" -s bottom_thickness="0.8" -s prime_tower_flow="100" -s material_diameter="1.75" -s raft_interface_acceleration="500" -s experimental="0" -s magic_fuzzy_skin_outside_only="False" -s retraction_min_travel="1.5" -s layer_0_z_overlap="0.15" -s speed_layer_0="20.0" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s roofing_layer_count="0" -s wall_0_inset="0" -s speed_support_interface="25.0" -s ironing_inset="0.2" -s skin_preshrink="0.8" -s machine_steps_per_mm_x="50" -s skirt_gap="10.0" -s support_zag_skip_count="10" -s wipe_pause="0" -s z_seam_position="back" -s speed="0" -s speed_print="50.0" -s brim_replaces_support="False" -s machine_nozzle_temp_enabled="True" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s infill_offset_x="0" -s jerk_wall="8" -s speed_travel="150.0" -s ironing_only_highest_layer="False" -s mesh_position_x="0" -s wipe_retraction_prime_speed="45" -s support_material_flow="100" -s slicing_tolerance="middle" -s roofing_pattern="lines" -s acceleration_infill="500" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s acceleration_roofing="500" -s retraction_hop_enabled="False" -s alternate_extra_perimeter="False" -s material_break_temperature="50" -s machine_endstop_positive_direction_x="False" -s infill_wall_line_count="0" -s conical_overhang_enabled="False" -s support_roof_pattern="grid" -s raft_speed="25.0" -s machine_extruder_end_pos_y="0" -s jerk_prime_tower="8" -s acceleration_travel_layer_0="500" -s extruder_nr="0" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="200" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s support_angle="45" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s material_print_temperature="200" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s support_bottom_angles="[ ]" -s infill="0" -s raft_interface_line_spacing="1.0" -s support_tree_collision_resolution="0.2" -s wipe_retraction_retract_speed="45" -s support_join_distance="2.0" -s machine_nozzle_cool_down_speed="2.0" -s bridge_wall_speed="12.5" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_stair_step_width="5.0" -s gradual_support_infill_steps="0" -s cool_fan_speed_max="100" -s support_interface_angles="[ ]" -s infill_angles="[ ]" -s top_bottom_pattern_0="lines" -s raft_surface_line_width="0.4" -s mold_roof_height="0.5" -s retraction_hop_only_when_collides="False" -s cooling="0" -s retraction_extra_prime_amount="0" -s raft_interface_fan_speed="0" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s gradual_infill_steps="0" -s material_print_temperature_layer_0="200" -s travel_avoid_distance="0.625" -s initial_bottom_layers="4" -s cool_fan_full_at_height="0.6000000000000001" -s support_bottom_density="33.333" -s machine_feeder_wheel_diameter="10.0" -s material_flow="100" -s retraction_extrusion_window="10" -s spaghetti_infill_enabled="False" -s initial_layer_line_width_factor="100.0" -s retraction_hop_after_extruder_switch_height="0.2" -s z_seam_relative="False" -s small_feature_speed_factor="50" -s bottom_skin_preshrink="0.8" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s retraction_combing_max_distance="30" -s top_thickness="0.8" -s platform_adhesion="0" -s support_tower_roof_angle="65" -s acceleration_support_bottom="500" -s command_line_settings="0" -s jerk_print="8" -s minimum_support_area="2" -s material_flush_purge_length="60" -s machine_nozzle_offset_y="0" -s line_width="0.4" -s brim_width="8.0" -s support_bottom_line_distance="2.4000240002400024" -s wall_min_flow="0" -s material_flush_purge_speed="0.5" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s bridge_fan_speed_3="0" -s support_skip_some_zags="False" -s wipe_repeat_count="5" -s raft_surface_fan_speed="0" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s retract_at_layer_change="False" -s wipe_brush_pos_x="100" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s raft_surface_acceleration="500" -s support_interface_height="0.8" -s mold_angle="40" -s jerk_infill="8" -s wall_min_flow_retract="False" -s support_bottom_stair_step_height="0.3" -s meshfix_maximum_resolution="0.05" -s dual="0" -s retraction_hop="0.2" -s top_skin_preshrink="0.8" -s filter_out_tiny_gaps="False" -s material_initial_print_temperature="200" -s wall_thickness="0.8" -s acceleration_prime_tower="500" -s multiple_mesh_overlap="0.15" -s jerk_ironing="8" -s raft_margin="15" -s support_bottom_pattern="grid" -s machine_nozzle_id="unknown" -s support_top_distance="0.2" -s travel_avoid_other_parts="True" -s support_z_distance="0.2" -s connect_skin_polygons="False" -s wall_material_flow="100" -s raft_fan_speed="0" -s support_interface_pattern="grid" -s switch_extruder_retraction_speed="20" -s bottom_skin_expand_distance="0.8" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -g -e0 -l "0" -s extruder_nr="0" 2020-07-30 03:29:36,815 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket. 2020-07-30 03:29:37,059 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed. 2020-07-30 03:29:37,061 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:29:37,063 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process 2020-07-30 03:29:37,066 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first. 2020-07-30 03:29:37,070 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening 2020-07-30 03:29:37,082 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe 2020-07-30 03:29:37,085 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49674', ''] 2020-07-30 03:29:37,119 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,121 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2 2020-07-30 03:29:37,123 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker 2020-07-30 03:29:37,125 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,128 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify 2020-07-30 03:29:37,131 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected 2020-07-30 03:29:37,133 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49674 2020-07-30 03:29:37,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by 2020-07-30 03:29:37,137 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or 2020-07-30 03:29:37,139 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version. 2020-07-30 03:29:37,141 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,143 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful, 2020-07-30 03:29:37,145 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2020-07-30 03:29:37,147 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2020-07-30 03:29:37,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details. 2020-07-30 03:29:37,151 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] 2020-07-30 03:29:37,153 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License 2020-07-30 03:29:37,155 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.

I’ve tried those methods twice so far and it didn’t help But since you mentioned about the GPU, how do I check that on Cura? I know for a fact that my graphics drivers are up to date

I currently have Cura 4.6.2 and a Aorus 7 gaming laptop. I wanted to test out the tolerances on my printer after the profile changes I've made with this file on Thingiverse (The STL file is attached to this thread) https://www.thingiverse.com/thing:2318105 But when I import it into Cura and click slice, nothing happens and the slicing progress bar doesn't budge. I've re-installed Cura like four times now, deleted all the associated files from my 'AppData' folder and anywhere else the Cura files could have been, and so far no luck I've checked the Windows firewall incase if an exception wasn't made for Cura and that checked out okay. Any advice/recommendations would be appriciated tolerance_test.stl