sabbot

I use ender 3 pro. All of a sudden I noticed that the power supply of printer is getting scratches by the bed. I tried leveling the bed and unscrewing the power supply and screwing it back. But nothing help. Can you please help me to fix it?

Is there anything to lubricate rather than the z axis rod?

Hi, I'm using ender 3 pro. The filament I'm using is pla+, the printer was doing fine but suddenly there is something wrong. It is printing the top part in the wrong place. Besides, there is so many thread like substances. I have tried leveling the bed several times. But I'm unable to find the problem. My nozzle temp us 210C and bed temperature is 70C. Is my printer missing several steps? Please help me. I have attached the picture of my print.

Thanks guys for answering my questions. I guess I wasn't patient enough for the whole print to be completed. Now I have started printing again and it's just doing great so far. Thanks again

I tried to print it with support and the support pattern was zig zag

Hi, I tried to print pusheen cat which was supposed to be a hollow object. But the printer kept filling inside, so I stopped printing. I was using Ender 3 pro and PLA+ filament. The nozzle temperature was 210 degree Celsius and bed temperature was 70 degree Celsius. The print speed was 30mm/s. The layer height was set to 0.2mm, the infill was 0% and the maximum resolution was 0.1. I used support, the pattern was zig-zag the support density was 10%. The wall thickness was 0.8mm. Please help me out. pusheen_little_tail.stl

@Mari thank you so much. I'll surely give it another try.

What was the wall height? By the way thanks for experimental printing.

Here is the project file gaming ring 22 mm.STL

Hi, I'm new to 3d printing. I use Ender 3 pro. I tried to print this ring with 0% infill, print speed of 30mm/s, resolution of 0.35. The extruder temperature was 210 degree celsius and bed temperature was 70 degree celsius. I'm totally unaware, what actually went wrong. My printer started printing something box like substance. I was using PLA+ filament. Please help to improve this. Thanks in advance.