HenryK

1: I am running the newest version of cura, this is my customized gcode, but the original code is no different ABL wise. 2: The only thing I have changed is the build plate, I am using this one here. 3: I am running firmware 1.7 something, (I can't check now because I am printing, and I will edit this post with the proper firmware) and I haven't tried updating it, I am afraid I will mess up because all I have is a mac. 4: Yes, and it works fine, but I feel that I should be utilizing the ABL. Or maybe if it ain't broke don't fix it. 😁 Hope this helps!

Actually, never mind on never mind. 😁 Edited the post.

When I slice my object in cura with this start gcode (I have tried the original and other versions too). M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate G28 ;Home G29 M413 S1;Power Loss Recovery M420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height M140 S50 ;Start heating bed M190 S50 ;Wait for bed to reach temp before proceeding M104 S{material_print_temperature} ;Start heating extruder M109 S{material_print_temperature} ;Wait for extruder to reach temp before proceeding G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X10.1 Y20 Z0.70 F5000.0 ;Move to start position G1 X10.1 Y200.0 Z0.70 F1500.0 E15 ;Draw the first line G1 X10.4 Y200.0 Z0.70 F5000.0 ;Move to side a little G1 X10.4 Y20 Z0.50 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up It probes, but the printer doesn't compensate for the bowed bed. What should I do? For now the printer with manual leveling works 90%. I feel that I am wasting the auto leveling system.

Wait! I tried this, and it works! I simply put a number 1 for the layer!

Mmmm... Doesn't work. Would it have to do with the fact that I am using a Creality CR-10s Pro?

Tried using the gcode. It works great but when I choose my material (pla) in cura, the bed temp still stays at 125 degrees C. What should I do?