jacprint

Thank MariMakes I did not realize the impact of Build Plate Adhesion, that is helpfull Thanks GregValiant keyboard command do work on Mac... when using command key, not control! All set now

Thanks GregValian The disallowed area explain the issue BTW the json file is at .../Ultimaker-Cura.app/Contents/Resources/share/cura/resources/definitions I went back and look in my older laptop and indeed was using: Ender 3 Pro, the v2 was not listed in Cura 5.0, only Ender 3, and that one already had those disallowed area That brings another question I did try to copy and paste start and stop G-code in machine setting window but copy and paste does not work I can type and delete directly in the window, that works, not copy and paste , not with a right click, not with the global menu I am saw a demo done on a Window pc where that works Is that normal on Mac, intel or arm, it is the same? Any way, now I can do it in the json file, so no biggy Thanks for the help

CE3E3V2_gear60Cyclo.3mfHere you go Also added a square shape 190 x 190 mm , there is free usable space on the sides but not front and back, I have printed on the same machine with Cura 4.6 a 210 x 210 with room for a squirt around CE3E3V2_squarre190.3mf

Hi thanks for the quick response i see the same issue in the picture you posted that double greyed zone front and back but not on the sides i will post another file when back home

Hi there I am having issue with strange no print zone on ender 3 I have a Mac M1, it did work for a while, even after moving to cura5.2 but not anymore and I was trying various printer then those zone appeared and can't get rid of them I deleted Cura, deleted Cura folder in library ( Macintosh HD\Users\[user_name]\Library\Application Support\cura) restarted from scratch with 5.2.1, just set basic ender 3 V2 did not touch any setting other then increase bed size to 300 x 300 to give a better visual on no print zones zones are still there, the position of them does not change with bed size If I load a custom printer set to 235 x 235 zones are not there I am including a picture of issue and a 3mf file, hopefully someone can figure out the issue It is an issue because it limit the print size front to back to barely 190 mm, I have printed gears up to 210 mm in diameter thanks for Cura CE3E3V2_gear60Cyclo.3mf

Hi I have been looking to enable retraction when moving between holes Is there a way to do that? Could not find the setting in Cura 4.6.1 Thanks