Hello,
Tried to with my S5, when the active bed-leveling program was run, the error of 'nozzle height difference is outside of realistic values' (paraphrased) came up.
I have tried:
- Swapping printer cores (AA-AA, AA-CC) combinations
- Thoroughly cleaning the bed (acetone, IPA)
- Manually re-leveling the bed
- ER45 came up during this process, looked at everything, seems ok, I re-seated the sensor plug anyways. The error hasn't come up again and it didn't come up when doing the XY offset calibration during the active bed-leveling portion.
I don't know what else to try. Core 2 is decently below Core 1 when activated (nothing abnormal) and high above when de-activated.
Any suggestions or solutions would be very welcome!