Jump to content

Cloud-Forge

Member
  • Posts

    12
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Cloud-Forge

  1. Absolument d'accord, je sais que c'est un forum utilisateur et comme je suis un utilisateur et que je n'ai plus de nouvelles de la part du SAV Ultimaker depuis quelques temps, je venais ici aux news à tout hasard. Je ne demande pas la résolution de mon ticket sur le forum, je viens voir ici si quelqu'un sait, si le SAV est en vacances ou si il y avait simplement du délai. Ou un autre souci. Merci
  2. Bonjour, j'ai un ticket incident ouvert depuis plus d'un mois. Il concerne un problème avec le Air-Manager. Le service technique m'a demandé ma facture ainsi qu'une photo du n° de série du ventilateur. J'ai fourni ces informations. Est-ce que tout le monde est en vacances ? ou autre problème ? Juste pour savoir qu'est ce que je dois faire avec le Air-Manager qui est démonté... D'avance merci. T BARDET. Request #11601 ER86 - Air Manager fan is unable to rotate at the desired speed Thomas Bardet July 26, 2021 12:43
  3. How long have you got the printer for ? Because my initial reaction was about yours, but after some trials and error I can now print very accurately. Cura is really a deep piece of software and the S5 a good machine. IMO. As such they take some time to be set right. At the difference of a cheaper printer that might be good at first, but hard to evolve upon. that's my experience anyway.
  4. I was wondering what was the best room temperature for day to day use, of an Ultimaker S5 printer. I am asking this, because I live in temperate zone. My workshop can get quite cold in winter (about 10°C during the night sometimes 5°C when it's really cold ) In summer it can get quite hot around 30°C (and little more at times) Regarding humidity it's Ok. I have checked. It's more temperature wise that I am concerned. And since winter in approaching, I was wondering if it's the right place to do some printing ? Or should I move my printing operations somewhere more temperate. Any incentives on that matter are welcome. Thanks. regards, Thomas.
  5. I have tried again and finally got the spool to get recognized :)
  6. Thanks Smithy. I have tried with UM PLA Yellow, same thing. But I am in the middle of a print, maybe the machine cannot print and look for filament at the same time.
  7. Hello, I am struggling to change filaments spool with the material station. At least the printer is struggling to recognize which filament I am inserting. (I am using Ultimaker filaments spool) (printer model S5 - September 2020 batch) Steps I take : open the material bay door press + sign on the chosen feeder (A,B, etc...) press "load" button insert the spool with the sticker on the left (filament going down) guide the filament tip into the chosen extruder. the screen show a yellow exclamation mark ==> the filament spool is not recognized... I unload pressing the up arrow button. Start again from number 2. I tried several times on different feeders... Without any luck. I tried to select the filament manually, but I can't find the right one in the menu. Here, I am looking for Ultimaker PLA Black All I find is just PLA without the possibility to choose the color etc... How to change filament spools ? What to do for the Material Station to detect the spool ? How to select the right filament spool in the menu when everything else fail ? Thanks Thomas.
  8. Thanks you. After some tests, trials and errors, I can now print whit the accuracy I need ! The settings I use are the one above with jerks at 20, retraction at every layers. I use the engineer profile at 1.5. Now my prints don't expand. The settings that help is Horizontal Expansion : -0.16 (For Ultimaker PLA Tough and Ultimaker PLA) Hope it help others as well. I got scared for a while, but the problem was the guy in front of the printer not the machine.
  9. Yeah sorry about that.. I agree it is not a good start. But I was feeling a bit let down after my few first prints. The handling of the machine and the startup was close to flawless, so I had really high expectations for the printing results. Now, I just got the printer less than a week ago, so I guess I'll have to find the right settings. To answer your questions: I use PLA tough (Ultimaker). I used the following settings I have found on an other thread about accuracy (I did left jerks as default) : Line width: 0.4 Wall thickness: 1.2 Top/Bottom thickness: 1.2 Speeds: 40 Jerks: 30 Horizontal expansion: -0.03 walls: 3 Also I use Engineering profile with 0.1 height. Now the pieces fit better, but I still struggle to screw them together. After I clean the burr line. What are the right settings for tough PLA for best accuracy ? Thanks.
  10. Having the same issue here. I'll have to find the right settings. I guess It'll take a little more work to achieve the accuracy I need.
  11. Yep ! I have a hard time for the material station to recognize the spools. I tried several times. Trying to turn it on the left side, but it doesn't get recognize... A bit frustrating. A manual override should be possible. It's painful to spend lots of time at each materials change... Or there something I am doing wrong idk.
×
×
  • Create New...