(cr 10 v2)
Hi, I have the BL touch auto leveling, and it works great.... except for one issue. First my bed heats up, and then my extruder(hot end?) heats up, and then my BL touch does it's thing. The issue is with my extruder/hot end heated up, the filament starts oozing out a tiny bit and kinda curls up on itself and makes a little ball, and no matter how hard I try I'm very unsuccessful at removing it, and this causes my prints to fail almost instantly. Is it possible to change my gcode to do bed heat, bl touch, then extruder heat up and printing?
My gcode is:
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G29;
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G29 is what does my BL touch, if I understand correctly. I'm new to 3d printing and have zero experience with coding or gcode, so I don't know at all, sorry. If there are any issues please let me know.