Cheers.
I am still new to 3D printing and have been struggling with this print for many days now and I can't seem to get it together
I have attatched the latest Cura project file so you can see the settings I have used in my last attempt.
The worst areas are one corner on the hollow model and no matter what i change in the settings I can't seem to get rid of this completely.
There are also some minor finish problemns on the rest of this side of the model.
.
The "front" of the model looks good I think, so I can't get my hed around this issue.
The top of the print also have some sad visual aspects.
The other part in the print file printed very nice I thought at first. Really good adhesion to the buildplate even tho its printed standing up with little surface area.
When I removed it from the printer it was not really as flawless as imagined.
All the measurements seem to be well within any tolearnces expected.
My thoughts are leaning towards some kind of heat problem with the top and maby corner of the first model, after that I am lost.
Quick summary is.
280C nozzle temp, (within recomended specs).
100C bed temp
70C chamber temp
0,25mm layer thickness
speed 60mm/s, outer wall 40mm/s
/Best Regards
Mats
Problem file1.5.9.3.3mf